10 in stock
Gasket, Plate, Bottom is used on Kinney brand of KT300C, KT300D pump models. The bottom plate gasket might be the problem. This gasket (Part# 807529) seals the bottom plate of your Kinney rotary piston pump. It fits several KTC models including KTC55, KTC60, KTC90, and KTC112. If you see oil leaking from the bottom of your pump or notice the pump losing vacuum, this gasket could be worn out. Replace it to stop leaks and keep your pump running strong.
This is the Kinney Top Plate Gasket (Part# 807417). It sits between the top plate and the pump body to create a tight seal. If your pump is leaking oil or losing vacuum, this gasket is likely the culprit. It is made to original specs for a perfect fit.
This is a pump body gasket for Becker vacuum pumps. It is made for the VTLF 2.400 and VTLF 2.500 models. A gasket is a simple seal. It sits between two metal parts. It stops air from leaking out. It also stops oil from leaking out. Without a good gasket, your pump will lose vacuum. It may also make a mess with oil. This gasket is a direct replacement. It fits just like the original Becker part. Change it when you do a rebuild or repair.
Becker VTLF dry vane pump sealed tight with this Pump Body Gasket (Part# 310052200). This gasket sits between the main pump body sections. It prevents air leaks and maintains strong vacuum performance . It fits Becker VTLF 2.200 and VTLF 2.250 pump models. This gasket is included in the Becker Gasket Set for these pumps (Part# 54900052200) . If you are doing a pump overhaul, this is the exact part you need.
This is the Pump Body Gasket for Becker VTLF 250 pumps (Part #310022200) . It creates a tight seal between the two halves of the pump body. This gasket is used on Becker VTLF 250 and VTLF 250A pumps . A bad pump body gasket causes air leaks, oil leaks, and loss of vacuum. Replace it today and get your pump working like new again.
This is the Pump Body Gasket for Becker VTLF 400 and VTLF 500 pumps (Part #310022500) . It creates a tight seal between the two halves of the pump body. A bad pump body gasket causes air leaks, oil leaks, and loss of vacuum. Replace it today and get your pump working right again.
Rietschle vacuum pump sealed tight with this replacement gasket ring (Part# 300184). Gaskets are the parts that sit between two metal surfaces. They stop air from leaking in and stop oil from leaking out. A bad gasket means lost vacuum and messy oil leaks.
This is a Teflon ring gasket for Rietschle vacuum pumps. It is made from PTFE, a special material that handles high heat and resists chemicals. Its job is to create a tight seal in specific parts of your pump. It lasts longer than regular rubber gaskets in tough conditions.
Becker VTLF dry vane pump sealed tight with this Suction Cover Gasket (Part# 300052200). This gasket creates a reliable seal for the suction cover (also called the inlet cover) on your pump. It prevents air leaks and maintains strong vacuum performance. It fits Becker VTLF 2.200, 2.250, 2.400, and 2.500 pump models . This gasket is included in the Becker VTLF 2.400/2.500 Gasket Kit . If you are doing a pump overhaul or replacing suction cover seals, this is the exact part you need.
This is a suction cover gasket for Becker vacuum pumps. It is made for the VTLF 250 and VTLF 250A models. The suction cover is the part where air enters the pump. The gasket seals that cover to the pump body. It stops air leaks. It also stops oil leaks. Without a good gasket, your pump will lose vacuum. This gasket is a direct replacement. It fits just like the original Becker part. Change it when you do maintenance or repairs.
Becker VTLF dry vane pump sealed tight with this Suction Cover Gasket (Part# 300022500). This gasket creates a reliable seal for the suction cover (also called the inlet cover) on your pump. It prevents air leaks and maintains strong vacuum performance . It fits Becker VTLF 400 and VTLF 500 pump models . This gasket is included in the Becker VTLF 400/500 Gasket Kit . If you are doing a pump overhaul or replacing suction cover seals, this is the exact part you need.
This is the Edwards Valve Body Gasket. Part number 27159619. It seals the valve body on your E1/E2M series vacuum pump . If your pump’s valve system is leaking gas or fluid, this is the part you need.
10 in stock
Becker VTLF dry vane pump sealed tight with this Exhaust Chamber Gasket (Part# 890052200). This gasket creates a reliable seal for the exhaust chamber on your pump, preventing air leaks and maintaining strong vacuum performance . It fits Becker VTLF 2.200, 2.250, 2.400, and 2.500 pump models . This gasket is included in the Becker VTLF 2.400/2.500 Gasket Kit . If you are doing a pump overhaul or replacing exhaust chamber seals, this is the exact part you need.
The Gearbox Purge Filter (Part # A22305073) is a replacement part for Edwards iH Series dry vacuum pumps. It is a small sintered or mesh filter that cleans the nitrogen gas used for the gearbox purge. In harsh or explosive (ATEX) environments, a continuous flow of nitrogen is used to pressurize the gearbox.
10 in stock
10 in stock
Not a member? Create an account
Already got an account? Sign in here
