- +1 (212)-695-1962
- [email protected]
- 463 7th Ave, NY 10018, USA
This Gasket Kit (Part # 1025681001) is the perfect solution for your Rietschle VC400 pump .
What’s Included in This Kit (Partial List):
| Component Type | Description |
|---|---|
| Shaft Seals | Shaft seal ring (40 x 55 x 7mm); Viton shaft seal (40 x 62 x 8mm) |
| O-rings | Various sizes including 40.00 x 2.00mm; Vacfox panel O-rings |
| Copper Washers | 10 x 16 x 1.0mm; 14 x 18 x 1.5mm; 16 x 22 x 1.5mm; 17 x 23 x 1.5mm |
| Gaskets | Filter housing gasket; Filter base gasket; Filter cover gasket; End plate gasket; PTFE gaskets (0.10mm and 0.15mm); Oil cooler block gasket |
| Valve Components | Valve disc (32.0 x 8.0 x 2.0mm) |
| Sealing Rings | Various sizes: 3/4″, 3/8″, 2″, 1-1/4″, 1/2″ |
This is a complete kit. It has almost everything you need for a full seal replacement job. Here is what you will get:
Shaft seals to stop leaks around the rotating parts. One is a standard seal. The other is made of Viton, a tough material that handles heat well.
Many O-rings in different sizes. These seal the connections between parts.
Copper washers that crush into place for a tight metal-to-metal seal.
Gaskets for the filter housing, filter base, and filter cover. These keep the filter area airtight.
A valve disc that helps control the flow of air and oil inside your pump.
PTFE gaskets that resist chemicals and high temperatures.
A gasket for the oil cooler block to stop leaks in the cooling system
This repair is for someone who knows vacuum pumps well. Always follow the safety steps in your pump’s manual.
Give your Rietschle VC400 pump the complete seal service it deserves. Order the Gasket Kit (Part# 1025681001) today.
Rietschle vacuum pump running clean and strong. This exhaust filter is made for V-VC series pumps, specifically VC202 and VC303 models. It removes oil mist from the exhaust air. A clean filter helps your pump work better and last longer.
This gasket kit is made for V-VC series pumps, specifically VC202 and VC303 models. It comes with all the O-rings, gaskets, a valve plate, and even a shaft seal. Use this kit to do a complete seal repair and make your pump airtight again .
Vane – Aluminium Alloy is used on the Rietschle brand of V – VC pump models VC400
Exact Fit: Made specifically for Rietschle VC400 vacuum pumps in the V-VC series
Aluminum Alloy Build: Strong, lightweight, and resistant to wear
Restores Suction: Worn vanes are the #1 reason pumps lose vacuum strength
Direct Replacement: Matches OEM specifications for part number 512740
Cost Effective: High-quality alternative that saves money over original parts
10 in stock
Complete filter service kit for Rietschle VC500 and VC700 vacuum pumps. Includes oil separator element, inlet filter, O-rings, and cover gasket. Restore pump efficiency today.
Used on Rietschle Vacfox VC500, VC700
For complete kit content details see bill of materials below
This major rebuild kit has everything you need for a complete overhaul of your VC 202 or VC 303 pump. It includes critical parts like new vanes, bearings, seals, gaskets, and exhaust filters. Instead of buying a new pump, use this all-in-one kit to restore your equipment’s performance at a fraction of the cost.
Reviews
There are no reviews yet.