The Ballast Filter (Part # 25907200) is a replacement part for Edwards E1/E2M series rotary vane pumps. This small felt filter cleans the air that enters the pump through the gas ballast valve. It stops dust and dirt from getting into your pump oil. If you change your pump oil, you should change this filter at the same time. It fits E2M2, E2M5, E2M8, and E2M12 models .
This Blade Kit is the fix you need. It includes new first stage vanes, second stage vanes, an oil pump vane, springs, and spring pins. It is a complete set for a minor repair. Get your pump pulling strong again.
10 in stock
10 in stock
Edwards E2M12 pump running reliably with this Clean & Overhaul Kit . This kit includes everything needed for a minor overhaul: seals, a coupling element, O-rings, gaskets, filters, springs, and other key components . It is designed for the E2M12 two-stage rotary vane pump .
10 in stock
10 in stock
10 in stock
10 in stock
The Edwards Rotor, 3rd Stage – Y (Part #40801727) is a replacement part for Edwards iH80 and iH160 dry vacuum pumps .
Used on Edwards E2M12, E2M18, and RV12
The Edwards EMF 20 Oil Mist Filter (Part # 46229000) is a exhaust filter for Edwards rotary vane vacuum pumps. It captures oil mist before it can escape into your workspace. This keeps your air clean and helps you follow health and safety rules . The filter has two stages. First, it traps oil droplets. Then it uses activated carbon to remove bad smells . It fits RV12, E2M12, and E2M18 pumps right out of the box .
Replace your worn shaft seal with this Edwards Viton seal. Part number 02109066 fits many popular Edwards pumps including the E2M2, E2M5, E2M8, E2M12, and RV3, RV5, RV8, RV12 models. The Viton material stands up to heat and chemicals better than standard rubber seals.
The Edwards Vane, 2nd Stage – GX (Part #20402079FR) is a replacement vane for Edwards E1/E2M series vacuum pumps. It fits the E2M2, E2M5, E2M8, and E2M12 models . This vane is made from GX material, a high-strength polymer that is both thermally stable and corrosion resistant .
The Felt Pad (Part # 22302013) is a replacement part for Edwards E1/E2M series rotary vane pumps . It fits E2M2, E2M5, E2M8, and E2M12 models . This small felt disc acts as a filter inside the pump. It traps dust and debris to keep your pump oil clean and protect internal parts
This Major Repair Kit is a complete overhaul kit for the Edwards E2M12 dual stage oil sealed rotary vane vacuum pump . It includes all the essential components needed for a full rebuild, such as GX vanes (1st stage, 2nd stage, and oil pump), seals, coupling elements, O-rings, gaskets, springs, oil filter, and other wear parts .
This Buna O-ring measures exactly 13.94 mm inner diameter with 2.62 mm thickness. It replaces Part #2125013 (cross-reference OB-1240E) . This O-ring is specifically used on Edwards E2M2, E2M5, E2M8, and E2M12 pump models .
This Buna O-ring measures exactly 21.6 mm inner diameter with 2.4 mm thickness. It replaces Part #2120042 (cross-reference OB-0940) . This O-ring is used on Edwards E2M12, E2M0.7, E2M1, and E2M1.5 pump models .
This Viton O-ring measures exactly 28.17 mm inner diameter with 3.53 mm thickness. It replaces Part #2125026. This O-ring is used on a very wide range of Edwards E1/E2M pump models including E2M2, E2M5, E2M8, E1M18, E2M18, E2M12, E2M0.7, E2M1, E2M1.5, E2M28, and E2M30 . The Viton (FKM) material handles high heat up to 200°C and harsh chemicals better than standard rubber.
This Buna O-ring measures exactly 35.5 mm inner diameter with 3 mm thickness. It replaces Part #02120072 (cross-reference OB-1859) . This O-ring is used on Edwards E1M18, E2M18, E2M12, E2M28, and E2M30 pump models . The Buna-N (Nitrile) material offers great oil resistance at a fair price.
This O-ring is used on a wide range of Edwards pump families, including EH Booster, QMB Blower, and E1/E2M models, covering pumps like QMB250, EH250, E2M2, E2M5, E2M8, and E2M12 The Buna-N (Nitrile) material offers great oil resistance at a fair price.
Not a member? Create an account
Already got an account? Sign in here
