This is a direct replacement for Part #A36501701. This front bearing housing is specifically designed for Edwards E1M80 and E2M80 pump models . It is also known as the HV Stator Sub-Assembly component . This is a critical mechanical part used during pump overhaul and repair. Sold individually (PK1)
This is a pair of timing gears (PK1) for Edwards EH2600 and EH4200 Mechanical Booster Pumps . These gears synchronize the twin Roots lobes, which is essential for maintaining vacuum performance and efficiency . Made from high-strength alloy, they are OEM-quality replacement parts .
This is a 1 inch BSP fill plug that replaces Part #A26002722. It is used on Edwards E2M40, E2M80, E1M175, and E2M275 pump models . This plug seals the oil fill port and prevents leaks.
This is a pack of 5 1/4 inch BSP plugs. They replace Part #A26002718 . These plugs fit a wide range of Edwards E2M40, E2M80, E1M175, and E2M275 pumps, and also fit newer style E1M18, E2M18, E2M28, and E2M30 models . “PK5” means you get 5 plugs.
This is a 1/8 inch BSP plug that replaces Part #A01403074 . It is a spare part for a range of industrial Edwards pumps, including the E2M40, E2M80, E1M175, and E2M275 models . It is also the correct plug for older style E1M18, E2M18, E2M28, and E2M30 pumps .
This is a 200g charge of Activated Alumina that replaces Part #H02600056 . This highly porous desiccant is used in the Edwards FL20K Foreline Trap to capture oil vapor and prevent it from back-streaming into your vacuum system . It is the correct replacement media for maintaining your trap’s efficiency
This is an Acorn Dowel that replaces Part #A22425008 . This pin is a specific mechanical component used in the assembly of the Edwards DP180 Dry Vacuum Pump .
This is a 0.45kg (450g) charge of Activated Alumina that replaces Part #H02600050 . This highly porous desiccant is used in the Edwards FL20K Foreline Trap to capture oil vapor and prevent it from back-streaming into your vacuum system . It is the correct replacement media for maintaining your trap’s efficiency.
This is an Intake Adaptor that replaces Part #A34306716 . It is a mechanical fitting specifically designed for the Edwards E1M18 and E2M18 pump models . “
This is an Inlet Adaptor that replaces Part #A36401032 It is a mechanical fitting specifically designed to adapt the ISO40 inlet port of the Edwards E2M40 pump to a standard NW40 vacuum flange . “PK1” means this is sold as a single unit.
This is an NW25 to 3/4″ BSP adaptor that replaces Part #A25908069 . It is the specific fitting used to connect an Edwards EMF10 or EMF20 oil mist filter to the exhaust port of your vacuum pump .
This is a mechanical Adaptor that replaces Part #A36501775 . It is specifically designed for use with the Edwards E1M80 and E2M80 pump models . “PK1” means this is sold as a single unit.
This is a complete Air Bleed Assembly that replaces Part #A65201005 . It is an original equipment manufacturer (OEM) component specifically designed for the Edwards RV series pumps, including the RV3, RV5, RV8, and RV12 models
This is an Angular Contact Bearing, model F-236611.2, that replaces Part #A20408004 . These bearings are essential components used in pump motors and major overhaul kits for many Edwards dry scroll pumps, such as the nXDS and XDS series .
This is an Angular Contact Bearing, model LD17/402RS, that replaces Part #A20408001 . This is the standard front angular contact bearing used in all major rebuild kits for the popular Edwards XDS and nXDS dry scroll pump series
This is a 25g tube of Apiezon® L Grease . It is a specialty, ultra-high vacuum (UHV) grease with an extremely low vapor pressure of 7 x 10⁻¹¹ Torr at 20°C . This makes it the standard choice for sealing ground glass joints, stopcocks, and fittings where silicone contamination is a concern .
This kit includes 15 high-quality steel shims. They help you adjust the rotor and manage clearance inside your pump. These are OEM-quality replacement parts made to fit perfectly.
The AV10K Air Admittance Valve is a simple, manual valve for your vacuum system. Turn the knob to let air in and release the vacuum. Made of strong aluminum with a reliable nitrile seal. Connects easily with an NW10 fitting.
This is a simple, strong ball valve. It connects a 1/2″ BSP male thread to a 1/2″ BSP female thread. Just turn the handle a quarter turn to start or stop flow. Works great for vacuum and pressure applications. Made of nickel-plated brass with reliable PTFE seals.
This is a Edwards steel ball. Part number 20414003. It is a small but important part used inside Edwards E2M series vacuum pumps. You will find it in the oil pump and valve assemblies. If you are rebuilding your pump, do not forget this tiny but critical piece.
Not a member? Create an account
Already got an account? Sign in here
