$9.57
Rietschle VFT60 pump sealed tight with this base filter gasket (Part# 300186). This gasket sits between the filter base and the pump body. It stops air leaks and prevents unfiltered air from bypassing the filter. A bad gasket means dirty air can get into your pump. That dirt wears down internal parts.

Gasket, Base Filter - Rietschle VFT60, Part# 300186

Gasket, Base Filter - Rietschle VFT60, Part# 300186
This gasket (Part# 300186) sits between the filter base and the pump body . Its job is to create a tight seal .
Here is why that matters:
Air comes into your pump through the inlet
That air should pass through the filter element
The filter traps dirt and dust
Clean air goes into the pump
This gasket is made for one specific pump model :
Rietschle VFT60
The VFT60 is a dry-running rotary vane vacuum pump. It is part of Rietschle’s VFT series. These pumps are oil-less, which means there is no oil to trap dirt. Clean air is even more important because there is nothing else to catch the dust.
On many pumps, the filter is a simple canister that screws on. Those use a rubber O-ring to seal.
The VFT60 is different. It has a separate filter base and a flat gasket. This design is common on industrial pumps where reliability matters.
The gasket goes between the base and the pump body. It is a static seal. It just sits there and gets squeezed. But if it gets old and hard, it stops sealing.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.