$25.97
This is a replacement vane with part number 3301012 for DVP dry vane vacuum pumps . It fits models CB 40 and SB 40 . These carbon vanes are essential components that ensure efficient and dependable pump operation
DVP Vane, CB/SB 40, Part# 3301012
DVP Vane, CB/SB 40, Part# 3301012
Dry vane pumps run without oil. That means the vanes inside do all the hard work. They slide in and out as the pump turns. This action seals the chamber and moves the air out.
When vanes wear down, your pump loses power. It cannot pull a strong vacuum anymore. The fix is simple: replace the old vanes with new ones.
This vane is made specifically for DVP dry vane pumps. It fits these models:
DVP CB 40
DVP SB 40
It may also fit the SA 40 model, but note that different pump models require different quantities of vanes .This vane is made from carbon (carbon graphite). Carbon is the perfect material for dry-running pumps.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
25 in stock
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB 18 and LB 25 lubricated vane pumps. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
Keep dirt out of your DVP LC.12 pump. This Perforated Screen (Part # 4503005) acts like a strainer. It catches small particles and debris before they can damage sensitive internal parts. Check and clean this screen during routine maintenance.
10 in stock
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
10 in stock
10 in stock
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.