10 in stock
The Sight Glass Reflector (Part #A25976001) is a direct replacement part for Edwards EH250 and EH500 booster pumps. It is the small white plate that sits behind the sight glass. This reflector makes the oil level much easier to see by providing a light-colored background. If your sight glass is hard to read, or if the white backing has fallen off or become yellowed, replace this reflector and see your oil clearly again.
The Sight Glass SP11/E2M0.7/1.5 is a direct replacement part for Edwards E2M series rotary vane pumps. It fits the E2M0.7, E2M1, and E2M1.5 models. This small round window lets you see the oil inside your pump without opening anything. You can check the oil level and see if the oil is clean or dirty. If your sight glass is cracked, cloudy, or leaking, replace it right away. A good sight glass helps you maintain your pump properly.
10 in stock
The Sight Glass Reflector (Part #25976001) is a direct replacement part for Edwards EH250 and EH500 mechanical booster pumps.
This sight level gauge is a small window that lets you see the oil level at a glance. No guessing. No opening the pump. Just look through the glass.
Quiet your Edwards dry scroll pump with this exhaust silencer. It reduces loud pumping noise and traps tip seal dust before it gets into your room. Fits XDS35i and XDS46i pumps. NW25 flange. Easy to put on.
This is the OEM exhaust silencer for Edwards nXDS and XDS dry scroll pumps. It fits nXDS6i, nXDS10i, nXDS15i, nXDS20i, XDS5, XDS5C, XDS10, and XDS10C models. It makes your pump quieter and traps dust. A direct replacement for the part.
This Silencer Spares Kit is designed for Edwards nXDS and XDS dry scroll pumps . It includes the essential replacement elements and foam block needed to reduce exhaust noise and keep your pump running quietly .
This Silencer Spares Kit is designed for the Edwards XDS35I dry scroll pump . It includes the replacement elements and foam block needed to reduce exhaust noise and capture tip seal dust
This is the Edwards high vacuum silicone grease. It comes in a 50g tube. Use it to lubricate O-rings, glass stopcocks, and vacuum joints. It works in systems down to very low pressures. A little goes a long way.
This Sleeve is a direct replacement part for Edwards QDP and DP series dry vacuum pumps . It is a cylindrical sleeve component used inside these pump systems. If your pump is making unusual noise or losing performance, replacing this sleeve can help restore proper operation.
This Sleeve is a direct replacement part for Edwards E1M275 and E2M275 rotary vane vacuum pumps . It is a cylindrical sleeve component used inside these pump systems. If your pump is making unusual noise or losing performance, replacing this sleeve can help restore proper operation.
This Sleeve, 2nd Stage (N-), 10 Pack is a bulk pack containing 10 sleeves for the Edwards iH80 dry vacuum pump . These sleeves are designed specifically for the second stage of this pump model . The (N-) coating provides enhanced durability and wear resistance. If your iH80 pump is making unusual noise or losing performance, replacing these sleeves can help restore proper operation .
This Sleeve, 2nd Stage (N-) is a direct replacement part for the Edwards iH80 dry vacuum pump . It is a cylindrical sleeve designed specifically for the second stage of this pump model. What makes this sleeve special is its (N-) coating, which provides enhanced durability and wear resistance .
This Sleeve, 2nd Stage (N+), 10 Pack is a bulk pack containing 10 sleeves for Edwards dry vacuum pumps. These sleeves are designed specifically for second stage (N+) applications . The (N+) coating provides enhanced durability and wear resistance. If your pump is making unusual noise or losing performance, replacing these sleeves can help restore proper operation.
This Sleeve, 2nd Stage is a direct replacement part for the Edwards iH80 dry vacuum pump . It is a cylindrical sleeve designed specifically for the second stage of this pump model. What makes this sleeve special is its (N+) coating, which provides enhanced durability and wear resistance .
This Sleeve, 3rd Stage (N+) Coated is a direct replacement part for the Edwards iH160 dry vacuum pump . It is a cylindrical sleeve designed specifically for the third stage of this pump model. What makes this sleeve special is its (N+) coating, which provides enhanced durability and wear resistance .
This Sleeve, 3rd Stage N coated, 10PK is a bulk pack containing 10 sleeves for the Edwards iH160 dry vacuum pump . These sleeves are designed specifically for the third stage of this pump model.
This Sleeve, 4th Stage (N-), PTFE is a direct replacement part for the Edwards iH160 dry vacuum pump . It is a cylindrical sleeve designed specifically for the fourth stage of this pump model.
Not a member? Create an account
Already got an account? Sign in here
