This is the TCV Overhaul Repair Kit for Edwards QDP40 and QDP80 Drystar dry vacuum pumps.
This is a Edwards thermal snap switch for diffusion pumps. It is a safety device that monitors pump temperature. If the pump gets too hot, the switch opens and turns off the heater. This prevents damage to the pump. It automatically resets when the pump cools down
This is a Edwards Open on Rise thermostat. It is a temperature control device. When the temperature goes up past a set point, this switch opens. That turns off the heater or triggers a safety. It is used on various Edwards vacuum pumps and systems.
This is a Edwards thin stainless steel shim. It is 0.050mm thick. You get a pack of 20 shims. These shims are used to adjust spacing and alignment inside Edwards vacuum pumps.
This is the thrust ring for the Edwards EH1200 Mechanical Booster pump. It is an internal component that helps manage axial loads and maintain proper clearances inside the pump. A direct OEM replacement part.
It is used on Edwards RV series vacuum pumps, including the RV12 model. This gasket seals the top plate to the pump body. It prevents oil leaks and vacuum loss.
This is the Edwards Top Plate for RV series rotary vane vacuum pumps. It fits RV3, RV5, RV8, and RV12 models. This is the main top cover of the pump. It seals the pump body and holds the top plate gasket. A direct OEM replacement part.
It is a direct replacement part for specific Edwards vacuum pumps and systems. This tube assembly is used to carry oil, gas, or air between components. A OEM part ensures a perfect fit.
This is the Edwards Tube Assembly for E1M40 and E2M40 rotary vane vacuum pumps. This tube is used for internal connections such as oil return or gas ballast lines. A direct OEM replacement part ensures a perfect fit.
This is the Edwards Tube Assembly for larger E1/E2M series rotary vane pumps. It fits E1M40, E2M40, E1M80, and E2M80 models. This tube is used for internal connections like the gas ballast or oil return system. A direct OEM replacement ensures a perfect fit.
This is the Edwards Tube Assembly for E2M175 and E2M275 two-stage rotary vane pumps. This tube is used for internal connections such as the oil distribution system or gas ballast circuit . A direct OEM replacement part ensures a perfect fit.
This is the Edwards Tube for E2M175 and E2M275 two-stage rotary vane pumps. This tube is used for internal connections such as the oil distributor system. A direct OEM replacement part ensures a perfect fit
This is the Edwards Tube Piping Oil. Part number 269-286-013. It is an oil line used inside Stokes and other Edwards vacuum pumps. This tube carries oil from the reservoir to the bearings and pump mechanism. A direct OEM replacement part.
This is Edwards Ultragrade 15 vacuum pump oil. It comes in a 1 litre bottle This is a low viscosity oil made by a special hydrotreating process. It is perfect for small rotary vane pumps and for pumps that need a cold start. It offers excellent thermal and oxidation stability.
This is the Edwards Ultragrade 15 vacuum pump oil. You get a full case of 12 one-litre bottles This is a low-viscosity mineral oil made by a special hydrotreating process. It is perfect for small rotary vane pumps like the E2M0.7 and E2M1.5, and for cold-start applications . It offers excellent thermal stability and low vapour pressure.
This is Edwards Ultragrade 15 vacuum pump oil in a 4 litre bottle . It is a low viscosity mineral oil made by a special hydrotreating process . It is perfect for small rotary vane pumps like the E2M0.7 and E2M1.5 . It offers excellent thermal stability, low vapour pressure, and great cold start performance .
This is Edwards Ultragrade 19 vacuum pump oil in a 1 litre bottle. It is the most popular oil for rotary vane pumps, offering excellent lubrication and low vapour pressure .
This is Edwards Ultragrade 19 vacuum pump oil. You get a full case of 12 one-litre bottles . It is the most popular oil for rotary vane pumps, offering excellent lubrication and extremely low vapour pressure . It is perfect for RV series pumps and many E2M models.
This is Edwards Ultragrade 19 vacuum pump oil in a 20 litre pail . It is the most popular oil for rotary vane pumps, offering excellent lubrication and extremely low vapour pressure . It is perfect for RV series pumps and many E2M models.
This is Edwards Ultragrade 19 vacuum pump oil in a 4 litre bottle. It is the most popular oil for rotary vane pumps, offering excellent lubrication and extremely low vapour pressure . It is perfect for RV series pumps and many E2M models.
Not a member? Create an account
Already got an account? Sign in here
