$1,153.20
The large center slide pin (Part# P805005) is a key internal part that helps the piston move smoothly. If this pin is worn, your pump cannot create strong vacuum. This is the exact replacement part for these Kinney rotary piston pumps.

Kinney Slide Pin- Large Center Part# P805005

Kinney Slide Pin- Large Center Part# P805005
This large center slide pin is made for two specific pump models:
Kinney KT300C
Kinney KT300D
The KT300C and KT300D are single-stage, triplex rotary piston pumps . They are tough, industrial-grade pumps. You will find them working hard in places like refrigeration service, vacuum drying, and food processing.
Replacing a slide pin is not a beginner job. It requires opening up the pump and removing the piston. You should have some mechanical experience or hire a vacuum pump repair shop.
If you are doing the job yourself, here is what the Kinney manual says about the large center slide pin :
Place the slide pin over the slide on the center piston.
Make sure the flat edges of the slide pin are toward the piston.
Insert the piston and slide pin into the cylinder with the piston port facing downward.
After reassembly, the manual notes that you should pour about 4 quarts (2 liters) of oil on the slide pins before finishing the fill . This helps lubricate them right from the start.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.