$10.64
10 in stock
Distributor Valve, Edwards, E1/E2M, E2M0.7, E2M1, E2M1.5, Part# 26501035 - vacstellar
Distributor Valve, Edwards, E1/E2M, E2M0.7, E2M1, E2M1.5, Part# 26501035 - vacstellar
Replacing this valve is a standard part of pump maintenance. It is located inside the pump mechanism. If you are comfortable working on your pump, you can replace it when you have the pump opened up for service.
Always check your pump’s manual for specific instructions. Make sure the pump is powered off, disconnected, and has cooled down before you start. If you are not sure about the repair, it is best to have a qualified service technician do the work.
Replacing this valve is a standard part of pump maintenance. It is located inside the pump mechanism. If you are comfortable working on your pump, you can replace it when you have the pump opened up for service.
Always check your pump’s manual for specific instructions. Make sure the pump is powered off, disconnected, and has cooled down before you start. If you are not sure about the repair, it is best to have a qualified service technician do the work.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Out of stock
Replace the worn shaft seal on your small Edwards pump with this Viton part. Part number 02109079 (also listed as SB0088) fits the E2M0.7, E2M1, and E2M1.5 models. This is a metal-cased Viton seal with dimensions of 16mm x 30mm x 7mm . It handles heat and chemicals better than standard rubber.
Out of stock
10 in stock
Out of stock
10 in stock
Out of stock
10 in stock
Out of stock
10 in stock
10 in stock
The Mesh Inlet Strainer (Part # 22305056) is a replacement part for the smallest Edwards E1/E2M series rotary vane pumps. It fits specifically the E2M0.7, E2M1, and E2M1.5 models . This is a simple metal mesh screen that sits inside the inlet port.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.