$3.57
This is the Case Gasket with part number 4901064 for DVP LC.12 series vacuum pumps . It seals the two main halves of the pump housing. You must replace this gasket every time you open the pump case for maintenance or repair to prevent oil leaks.
Case Gasket, DVP LC.12 - Part # 4901064
Case Gasket, DVP LC.12 - Part # 4901064
This gasket fits between the two main sections of the DVP LC.12 pump housing. Its job is to keep the oil inside the pump where it belongs. It also keeps dirt and dust from getting into the moving parts.
The inside of a vacuum pump is a messy place. It is full of hot oil and moving parts. The gasket takes a lot of stress. A good new gasket ensures:
No oil leaks from the center seam of the pump.
Proper vacuum pressure is maintained.
Longer pump life because dirt stays out.
This gasket is made for the DVP LC.12 Series . The LC.12 is a single-stage rotary vane vacuum pump. It moves about 12 cubic meters of air per hour and can pull down to 2 mbar vacuum pressure
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Out of stock
Out of stock
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
15 in stock
20 in stock
25 in stock
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
10 in stock
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB 18 and LB 25 lubricated vane pumps. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB 40 and SC 40 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.