$17.71
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Air Filter, DVP, Dry Vane, SB16, SB25, Part# 1801036
Air Filter, DVP, Dry Vane, SB16, SB25, Part# 1801036
This is an air intake filter (Part # 1801036). It fits on the inlet side of your pump. As air gets pulled into the pump, this filter catches any dust, dirt, or debris. Only clean air passes through to the inside of your pump .
This filter is made for DVP dry-running vane pumps. It fits these models :
SB 16
SB 25
DVP SB series pumps are dry-running vacuum pumps . They do not use oil for sealing. Instead, they use carbon vanes that slide inside the pump body. These pumps are common in factories for applications that cannot have any oil contamination .
Because there is no oil to trap dirt, a good air filter is even more important on dry pumps than on oil-lubricated ones.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
Keep your DVP LB.40 vacuum pump sealed tight with this genuine ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
10 in stock
DVP LC.20 pump sealed tight. This Case Gasket (Part # 4901072) goes between the pump body and the end cover. Replace it every time you open the pump for service. It stops air leaks and keeps your vacuum strong.
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP lubricated vane pump running clean with this air-oil separator / oil separator filter. Made specifically for DVP LB40, LB60, LC40, and LC60 pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.