$169.40
This is a replacement vane with part number 3302038 for the DVP LC.150 series vacuum pump . This vane is an essential component that helps generate flow by sliding against the pump’s internal surfaces .
Vane, DVP, LC150, Part# 3302038
Vane, DVP, LC150, Part# 3302038
this vane sits inside a slot on the pump rotor. As the rotor spins, the vane slides out and presses against the pump wall. This creates a tight seal. That seal stops air and fluid from leaking back. The result is strong, steady vacuum power .
This vane is made specifically for the DVP LC.150 series pump . The LC.150 is a single-stage rotary vane vacuum pump. It moves about 150 cubic meters of air per hour and can pull down to 200 pa vacuum pressure .
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
25 in stock
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB40, LB60, LB100, and LC series pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB 18 and LB 25 lubricated vane pumps. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
Keep your DVP LC.12 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
10 in stock
Keep dirt out of your DVP LC.12 pump. This Perforated Screen (Part # 4503005) acts like a strainer. It catches small particles and debris before they can damage sensitive internal parts. Check and clean this screen during routine maintenance.
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.