$17.15
Keep your DVP LC.150 or LC.105 vacuum pump sealed tight with this cork case gasket. This gasket fits between the main housing sections of your pump. It prevents air from leaking in and oil from leaking out. Made from durable cork material that resists oil and compresses to form a tight seal. OEM quality direct replacement.
Case Gasket, Cork, DVP LC.150 - Part # 4901045PP
Case Gasket, Cork, DVP LC.150 - Part # 4901045PP
This is a cork case gasket (Part # 4901045PP). It is a large, flat gasket made from cork .
This gasket fits between the two main sections of your pump housing. Its job is simple but very important. It stops air from leaking in and stops oil from leaking out of the main pump body.
This cork case gasket fits the following DVP pump models :
LC 150
LC 105
The DVP LC series pumps are single-stage, oil-lubricated rotary vane pumps . They have an oil recirculating lubrication system. The LC.150 has a pumping speed of 150 m³/h and an ultimate vacuum of 0.5 mbar .
These pumps are used in many industries, including medical systems, vacuum food drying and packaging, chemical processing, electronics, and semiconductors
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
10 in stock
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
20 in stock
These Perforated Screens act like strainers inside your pump. Choose the screen for your model: #4503005 for DVP LC.12 or #4502009 for DVP LB.40. Replace or clean them during routine maintenance to keep your pump running strong.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
Keep your DVP LC.105 or LC.150 vacuum pump sealed tight with this copper ring gasket. Made from soft copper that compresses to form a perfect seal. Ideal for high-temperature areas where rubber gaskets would fail. OEM quality direct replacement.
10 in stock
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
Keep your DVP LB.40 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.