$26.67
This is a pump body gasket for Becker vacuum pumps. It is made for the VTLF 2.400 and VTLF 2.500 models. A gasket is a simple seal. It sits between two metal parts. It stops air from leaking out. It also stops oil from leaking out. Without a good gasket, your pump will lose vacuum. It may also make a mess with oil. This gasket is a direct replacement. It fits just like the original Becker part. Change it when you do a rebuild or repair.
Gasket, Pump Body
Gasket, Pump Body
A gasket is a flat piece of special material. It sits between two metal parts of your pump. In this case, it sits between the two halves of the pump body.
Think of it like the rubber seal on a jar lid. That seal keeps air from getting in or out. This gasket does the same job for your vacuum pump. It creates a tight seal. It stops leaks.
The gasket fills those tiny gaps. It gets squished between the metal parts. That squishing creates a perfect seal.
Over time, gaskets can fail. They can get hard and brittle. They can crack. They can get crushed. When a gasket fails, you get problems:
The pump loses vacuum strength
Oil leaks out onto the floor
The pump has to work harder
Your electricity bill goes up
This gasket is made for Becker VTLF pumps. It fits two specific models:
VTLF 2.400
VTLF 2.500
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
Becker VTLF pump with this distance disc. It measures 45 mm outer diameter, 55 mm inner diameter, and only 0.025 mm thick. Made for VTLF400, VTLF500, VTLF2.400, and VTLF2.500 pumps. This ultra-thin shim is a critical part for getting the rotor spacing exactly right during a rebuild.
Used on Becker VTLF 400, VTLF 500, VTLF 2.400, VTLF 2.500
10 in stock
This is the Seal for Becker VTLF pumps (Part #94807400000) . It is a direct replacement seal used on Becker VTLF 2.400 and VTLF 2.500 vacuum pumps. A bad seal causes air and oil leaks. It also makes your pump lose power. Replace it today and get your pump back to peak performance.
Kit Contents (Bill of Materials):
| Part Number | Description | Quantity |
|---|---|---|
| 90959700000 | Filter Cartridge for Becker VTLF | 1 |
| 90137301008 | Vane Kit for VTLF 2.400 / VTLF 2.500 (set of 8 carbon vanes) | 1 |
| 74330500000P | TA15/2 Grease, 50g Tube | 2 |
This is the Maintenance Kit for Becker VTLF 2.400 and VTLF 2.500 pumps (Part #338068M0000) . It includes everything you need for a complete pump tune-up: a Filter Cartridge (90959700000) , a Vane Kit (90137301008) , and two tubes of TA15/2 Grease (74330500000P) . This is a maintenance kit that keeps your pump running at peak performance.
10 in stock
This part is used in Becker VTLF series oil-free rotary vane pumps. Specifically:
Becker VTLF 2.200
Becker VTLF 2.250
Becker VTLF 250A
You will find it included in Becker repair kits 33803800000 (for VTLF 2.200/2.250) and 33804500-A0 (for VTLF 250A)
10 in stock
10 in stock
Becker VTLF dry vane pump sealed tight with this Suction Cover Gasket (Part# 300052200). This gasket creates a reliable seal for the suction cover (also called the inlet cover) on your pump. It prevents air leaks and maintains strong vacuum performance. It fits Becker VTLF 2.200, 2.250, 2.400, and 2.500 pump models . This gasket is included in the Becker VTLF 2.400/2.500 Gasket Kit . If you are doing a pump overhaul or replacing suction cover seals, this is the exact part you need.
Becker VTLF pump with this distance disc. It measures 45 mm outer diameter, 55 mm inner diameter, and 0.05 mm thick. Made for VTLF400, VTLF500, VTLF2.400, and VTLF2.500 pumps. This thin shim is a critical part for getting the rotor spacing exactly right during a rebuild.
Used on Becker VTLF 400, VTLF 500, VTLF 2.400, VTLF 2.500
Becker VTLF vacuum pump sealed tight with this Flange Gasket (Part #790022200). This genuine replacement part stops air leaks around the flange connection. It is made for VTLF 250 and VTLF 250A models. A simple, affordable fix to keep your pump running strong.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.