$167.30
The Odour Removal Element for EMF3 (Part # A22304081) is a replacement activated carbon filter for the Edwards EMF3 Oil Mist Eliminator . This listing is for a Pack of 5 (Pk5) elements. Its job is to remove the bad smells from the exhaust air after the oil mist has been trapped . It is designed for use with Edwards Speedivac 2, E2M0.7, E2M1.5, and sometimes E2M2 pumps .
Odour Removal Element EMF3 Pk5
Odour Removal Element EMF3 Pk5
The Edwards EMF3 is a two-stage filter :
The Oil Element (Mist): The exhaust gas enters and hits a glass fiber element. This catches the liquid oil droplets (the visible smoke). The oil drips down into the base of the filter.
The Odour Element (Smell): The “cleaned” air then passes through this Activated Carbon element just before it exits to the atmosphere. This removes the smell.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
This is a deep groove ball bearing for Edwards vacuum pumps and boosters. The dimensions are 62mm outer diameter, 30mm inner diameter, and 16mm width.
The COUPLING BOSS FAN ASSEMBLIES is a replacement part set made for Edwards EH Series Mechanical Booster Pumps. This assembly includes both the coupling boss and the cooling fan. The coupling boss connects the motor to the pump drive. The fan attaches to the boss and keeps the coupling area cool during operation. If your pump runs hot or the drive feels loose, this assembly may need replacement. Get both parts together in one convenient set.
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
This is a cylindrical roller bearing for Edwards E1M80 and E2M80 vacuum pumps.
10 in stock
10 in stock
10 in stock
This is a single row ball bearing, size 6309, used on Edwards pump models . Single row ball bearings support radial loads and allow for smooth rotation. They consist of an outer ring, inner ring, cage, and balls that maintain separation between the rings .
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.