This is a direct replacement for Part #A36501701. This front bearing housing is specifically designed for Edwards E1M80 and E2M80 pump models . It is also known as the HV Stator Sub-Assembly component . This is a critical mechanical part used during pump overhaul and repair. Sold individually (PK1)
This is a pair of timing gears (PK1) for Edwards EH2600 and EH4200 Mechanical Booster Pumps . These gears synchronize the twin Roots lobes, which is essential for maintaining vacuum performance and efficiency . Made from high-strength alloy, they are OEM-quality replacement parts .
This is a 1 inch BSP fill plug that replaces Part #A26002722. It is used on Edwards E2M40, E2M80, E1M175, and E2M275 pump models . This plug seals the oil fill port and prevents leaks.
This is a pack of 5 1/4 inch BSP plugs. They replace Part #A26002718 . These plugs fit a wide range of Edwards E2M40, E2M80, E1M175, and E2M275 pumps, and also fit newer style E1M18, E2M18, E2M28, and E2M30 models . “PK5” means you get 5 plugs.
This is a 1/8 inch BSP plug that replaces Part #A01403074 . It is a spare part for a range of industrial Edwards pumps, including the E2M40, E2M80, E1M175, and E2M275 models . It is also the correct plug for older style E1M18, E2M18, E2M28, and E2M30 pumps .
This is a 200g charge of Activated Alumina that replaces Part #H02600056 . This highly porous desiccant is used in the Edwards FL20K Foreline Trap to capture oil vapor and prevent it from back-streaming into your vacuum system . It is the correct replacement media for maintaining your trap’s efficiency
This is an Acorn Dowel that replaces Part #A22425008 . This pin is a specific mechanical component used in the assembly of the Edwards DP180 Dry Vacuum Pump .
This is a 0.45kg (450g) charge of Activated Alumina that replaces Part #H02600050 . This highly porous desiccant is used in the Edwards FL20K Foreline Trap to capture oil vapor and prevent it from back-streaming into your vacuum system . It is the correct replacement media for maintaining your trap’s efficiency.
This is an Intake Adaptor that replaces Part #A34306716 . It is a mechanical fitting specifically designed for the Edwards E1M18 and E2M18 pump models . “
This is an Inlet Adaptor that replaces Part #A36401032 It is a mechanical fitting specifically designed to adapt the ISO40 inlet port of the Edwards E2M40 pump to a standard NW40 vacuum flange . “PK1” means this is sold as a single unit.
The KF25 to 3/4″ BSP Adaptor (Part # C10501714) is a Edwards fitting. It converts a KF25 (NW25) vacuum port to a 3/4 inch BSP male thread . This adaptor is often used to connect Edwards EMF oil mist filters to pump exhaust ports.
This is an NW25 to 3/4″ BSP adaptor that replaces Part #A25908069 . It is the specific fitting used to connect an Edwards EMF10 or EMF20 oil mist filter to the exhaust port of your vacuum pump .
This is a mechanical Adaptor that replaces Part #A36501775 . It is specifically designed for use with the Edwards E1M80 and E2M80 pump models . “PK1” means this is sold as a single unit.
This is a complete Air Bleed Assembly that replaces Part #A65201005 . It is an original equipment manufacturer (OEM) component specifically designed for the Edwards RV series pumps, including the RV3, RV5, RV8, and RV12 models
This is an Angular Contact Bearing, model F-236611.2, that replaces Part #A20408004 . These bearings are essential components used in pump motors and major overhaul kits for many Edwards dry scroll pumps, such as the nXDS and XDS series .
This is an Angular Contact Bearing, model LD17/402RS, that replaces Part #A20408001 . This is the standard front angular contact bearing used in all major rebuild kits for the popular Edwards XDS and nXDS dry scroll pump series
This is a 25g tube of Apiezon® L Grease . It is a specialty, ultra-high vacuum (UHV) grease with an extremely low vapor pressure of 7 x 10⁻¹¹ Torr at 20°C . This makes it the standard choice for sealing ground glass joints, stopcocks, and fittings where silicone contamination is a concern .
This kit includes 15 high-quality steel shims. They help you adjust the rotor and manage clearance inside your pump. These are OEM-quality replacement parts made to fit perfectly.
The AV10K Air Admittance Valve is a simple, manual valve for your vacuum system. Turn the knob to let air in and release the vacuum. Made of strong aluminum with a reliable nitrile seal. Connects easily with an NW10 fitting.
10 in stock
Not a member? Create an account
Already got an account? Sign in here
