Busch Major Repair Kit with GX Vanes – 0063C / 0063E Part# BMK012

We put together every single part you need. No running around looking for missing pieces. Here is what you get :

The Heart – GX Vanes (3 pieces)
These are the most important parts of your pump. The GX vanes are made from a strong G11 fiberglass composite material . They are very strong. They do not soak up moisture. They handle heat well and last a long time . GX vanes are a great choice for standard industrial applications.

The Seals – Shaft Seals (2 pieces)
These stop oil from leaking out where the pump shaft comes out. Both are made of Viton rubber. Viton handles high heat and chemicals very well. Each seal is 30 mm inner diameter, 42 mm outer diameter, and 6 mm thick .

The Bearings
You get two needle bearings (part# 47300400) and two bearing sleeves (part# 472105822) . These keep your pump spinning smoothly and quietly.

The Gaskets
We include a full set of gaskets:

• Two cylinder gaskets (part# 48011200) and one cylinder gasket (part# 480000150) – seal the pump cylinder

• Ring gaskets (part# 48401700, 48402900 copper, 48403400)

• Oil sight glass gasket (part# 48023100)

• Other service gaskets (part# 48015000, 48015300, 480108718, 48221000)

The O-rings (8+ pieces)
We include many Viton O-rings in different sizes:

• 128 x 3 mm (2 pieces, part# 48653900)

• 35 x 4 mm (2 pieces, part# 48651200)

• 44 x 3 mm (1 piece, part# 48655900)

• 22 x 2 mm (1 piece, part# 48650500)

• And more (part# 48652600) 

The Valves and Hardware

• Two exhaust valves – made of Viton rubber (part# 916126769)

• One oil drain plug – nylon, 1/2 inch (part# 710000010)

• Oil sight glass (part# 83623) and sight glass assembly (part# 500015PP)

• Four threaded taper pins (part# 437000074)

• Two M8 hex nuts (part# 42000700)

• One retaining ring (part# 43238000) 

The Inlet Screen
One conical inlet screen (part# 53401800) to keep debris out of your pump