$44.66
This Dowty Seal (Part #4088022) is a replacement part made for two popular Pfeiffer pump models: the UNO 1.5A and the DUO 1.5A . A Dowty seal is a special type of seal. It has a rubber ring bonded to a metal outer ring. This design creates a very tight, reliable seal that stops oil from leaking out and air from getting in . If you are rebuilding your small Pfeiffer pump or fixing a leak, this is exactly the part you need.
Dowty Seal, Pfeiffer, UNO, DUO, Part# 4088022
Dowty Seal, Pfeiffer, UNO, DUO, Part# 4088022
A regular O-ring or flat gasket is just rubber. A Dowty seal is smarter. It has a rubber ring bonded tightly inside a metal outer ring . When you tighten a bolt or fitting onto a Dowty seal, the rubber compresses and creates a perfect seal. The metal ring keeps it from squishing out too much. The result? A seal that works great for both vacuum and pressure applications.
This Dowty seal is made for these Pfeiffer pump models :
UNO 1.5A (single stage pump)
DUO 1.5A (two stage pump)
Check your pump’s model tag before ordering. Look for “UNO 1.5A” or “DUO 1.5A” on the label
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
10 in stock
11 in stock
10 in stock
This spring (Part #3838132SV) is a replacement part used across a wide range of Pfeiffer UNO and DUO series vacuum pumps. It is a critical component found in valve and flap mechanisms, including models like UNO1.5A, DUO1.5A, UNO35, DUO35, DUO65, DUO11, and DUO6 . If you are rebuilding your pump or restoring its performance, this spring is an essential part of the job. It is also known by the cross-reference number B0042 .
This Leak Nozzle (Part #220170A) is a component for your Pfeiffer vacuum pump . It is used on Pfeiffer pumps within the UNO and DUO families . Its job is to control the flow of gases inside the pump. Think of it like a small but important passageway. It manages and directs gas movement. This helps your pump run efficiently and reliably . If your pump is not performing well, a worn or clogged leak nozzle could be the reason. This is a replacement part.
10 in stock
10 in stock
This Vane Spring (Part #3836534) is a replacement part made specifically for Pfeiffer UNO 1.5A and DUO 1.5A vacuum pumps . Its job is to provide the necessary tension and support for the vanes inside your pump . This allows the vanes to move freely while maintaining proper contact with the pump’s rotor . If you are rebuilding your pump, you will need four of these springs for a complete repair
This Cork Oil Box Gasket (Part #192124) is a replacement seal for your Pfeiffer vacuum pump. It fits between the oil box (or oil casing) and the main pump body . Its job is simple but very important. It keeps the oil where it belongs. It stops leaks. It also prevents outside air from getting into the pump. This gasket is made for the Pfeiffer UNO 1.5A and DUO 1.5A pump models . If you see oil leaking from your pump, this gasket might be the problem. Replace it during your next maintenance.
10 in stock
This Shaft Seal (Part #4083174) is a replacement part made for two popular Pfeiffer pump models: the UNO 1.5A and the DUO 1.5A . Its main job is to seal the rotating shaft where it enters the pump body. This stops oil from leaking out and keeps air from getting in. If you are rebuilding your small Pfeiffer pump or fixing a leak, this is the part you need. It is also known by the cross-reference number SV0004 and is included in the official repair kit for these pumps .
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.