$42.84
This is a replacement Spring with part number 4701038 for DVP LC.20 series vacuum pumps. Springs are critical components used inside pump mechanisms for valve operation. Replacing old or weak springs during a rebuild helps restore proper vacuum performance.
Spring, DVP LC.20 - Part # 4701038PP
Spring, DVP LC.20 - Part # 4701038PP
Inside your DVP LC.20 pump, this spring helps the valves open and close at the right time. When a spring gets weak or breaks, those valves do not work correctly. That leads to poor vacuum performance and lower efficiency.This spring is made specifically for the DVP LC.20 Series. The LC.20 is a two-stage rotary vane vacuum pump. It moves about 20 cubic meters of air per hour and can pull down to a strong vacuum.
If the spring looks rusty or corroded.
If it feels weak or stretched out compared to a new one.
If you are doing a full pump rebuild – always replace old springs while you have the pump open.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
This is the Case Gasket with part number 4901071 for DVP LC.20 series vacuum pumps . It seals the two main halves of the pump housing. You must replace this gasket every time you open the pump case for maintenance or repair to prevent oil leaks.
25 in stock
10 in stock
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
20 in stock
This G1 Oil Sight Glass (Part # 550050) lets you quickly check the oil level and condition in your DVP vacuum pump. It fits directly into the pump housing with a standard G1 thread. If your current sight glass is cracked, cloudy, or leaking, replace it with this part.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB 18 and LB 25 lubricated vane pumps. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.