$46.06
This G1 Oil Sight Glass (Part # 550050) lets you quickly check the oil level and condition in your DVP vacuum pump. It fits directly into the pump housing with a standard G1 thread. If your current sight glass is cracked, cloudy, or leaking, replace it with this part.
Oil Sight Glass, G1 - Part # 550050
Oil Sight Glass, G1 - Part # 550050
our vacuum pump needs oil to run. Too little oil, and the pump overheats and fails. Too much oil, and it blows out through the exhaust. Dirty oil, and the pump loses vacuum power.
How do you know if the oil level is right?
You look at the sight glass.
This small glass window is mounted on the side of your pump housing . It lets you see the oil level instantly. No guessing.
According to the Precision Plus website, this G1 sight glass fits several DVP pump models :
DVP LB.40
DVP LC.20
DVP LC.105
It may also fit other pumps that use a standard G1 threaded port.
the oil level is too low, the pump loses vacuum power and overheats. If the oil level is too high, oil blows out of the exhaust port.
The sight glass lets you check the level in seconds. Most pumps have upper and lower level lines marked on the glass or on the pump housing next to the glass .
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
This Tolerance Ring (Part # 1601014PP) helps adjust the internal clearance of your pump. It measures 35mm in outer diameter and is 12mm thick. A simple replacement part that restores pumping efficiency and prevents metal-on-metal wear inside your LB 40 pump model.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
Keep your DVP LC 25 vacuum pump running clean with this air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit .
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
10 in stock
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
This is a replacement spring for DVP LB.40 vacuum pumps. It carries part number 4701030PP . This spring is used inside the pump. It helps certain parts move back and forth the way they should. If your pump is not working right, a broken or weak spring could be the problem. This genuine OEM-quality part brings back the proper function your pump needs
DVP LC.20 pump sealed tight. This Case Gasket (Part # 4901072) goes between the pump body and the end cover. Replace it every time you open the pump for service. It stops air leaks and keeps your vacuum strong.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.