$24.15
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
COUPLING ELEMENT EM18/28/30
COUPLING ELEMENT EM18/28/30
This listing is for 1 coupling element. Just the rubber spider. You do not get the metal coupling bosses. You only get the rubber insert.
Installation tip
When you install this part, make sure the coupling bosses are clean. No old rubber stuck to them. Also make sure both coupling bosses sit flush with their shafts – no gap. Then put the spider in between and bolt the motor back on .
Keep your Edwards pump running quiet and smooth. Order the COUPLING ELEMENT EM18/28/30 today.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
This is a single row ball bearing, size 6309, used on Edwards pump models . Single row ball bearings support radial loads and allow for smooth rotation. They consist of an outer ring, inner ring, cage, and balls that maintain separation between the rings .
This is a cylindrical roller bearing for Edwards E1M80 and E2M80 vacuum pumps.
10 in stock
The COUPLING BAFFLE EH500 is a replacement part made for the Edwards EH500 Mechanical Booster Pump. It sits inside the coupling-cover assembly. Its main job is to manage oil flow and reduce oil mist escaping from the gearbox area. This simple part helps keep your pump clean and running smoothly for longer.
10 in stock
The COUPLING ELEMENT RV PUMP is a rubber replacement part made for Edwards RV3 and RV5 rotary vane pumps This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while soaking up vibration and shock. If your RV pump is noisy or shaking too much, this part is likely worn out.
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
10 in stock
This is a D-Row single ball bearing used on Edwards XDS scroll pumps . It fits models XDS5, XDS5C, XDS10, and XDS10C.
10 in stock
This is a caged ceramic bearing for Edwards HCDP, iH80, and iH160 dry vacuum pumps . The caged ceramic construction provides superior durability and performance . This bearing supports the rotating components of the pump, promoting smooth and efficient operation .
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.