$14.58
The Odor Element for EMF10 (Part # 22304079S) is a replacement activated carbon filter for the Edwards EMF10 Oil Mist Eliminator. This specific listing is for a single element. Its job is to remove the bad smells from the exhaust air after the oil mist has been trapped. It is designed for use with Edwards RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, and E2M12 pumps .
Filter, Element, Odor, EMF10, Single, Edwards, Part# 22304079S
Filter, Element, Odor, EMF10, Single, Edwards, Part# 22304079S
he Edwards EMF10 is a two-stage filter :
The Oil Element (Mist): The exhaust gas enters and hits a glass fiber element. This catches the liquid oil droplets (the visible smoke). The oil drips down into the base of the filter.
The Odor Element (Smell): The “cleaned” air then passes through this Activated Carbon element just before it exits to the atmosphere. This removes the smell.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
This is a deep groove ball bearing for Edwards vacuum pumps and boosters. The dimensions are 62mm outer diameter, 30mm inner diameter, and 16mm width.
10 in stock
This is a single row ball bearing, size 6309, used on Edwards pump models . Single row ball bearings support radial loads and allow for smooth rotation. They consist of an outer ring, inner ring, cage, and balls that maintain separation between the rings .
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
10 in stock
This is a bearing retainer, also known as a bearing cage, for Edwards vacuum pumps . Its job is to keep the rolling elements (balls or rollers) inside the bearing evenly spaced .
10 in stock
10 in stock
10 in stock
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
This is a D-Row single ball bearing used on Edwards XDS scroll pumps . It fits models XDS5, XDS5C, XDS10, and XDS10C.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.