$14.58
The Odor Element for EMF10 (Part # 22304079S) is a replacement activated carbon filter for the Edwards EMF10 Oil Mist Eliminator. This specific listing is for a single element. Its job is to remove the bad smells from the exhaust air after the oil mist has been trapped. It is designed for use with Edwards RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, and E2M12 pumps .
Filter, Element, Odor, EMF10, Single, Edwards, Part# 22304079S
Filter, Element, Odor, EMF10, Single, Edwards, Part# 22304079S
he Edwards EMF10 is a two-stage filter :
The Oil Element (Mist): The exhaust gas enters and hits a glass fiber element. This catches the liquid oil droplets (the visible smoke). The oil drips down into the base of the filter.
The Odor Element (Smell): The “cleaned” air then passes through this Activated Carbon element just before it exits to the atmosphere. This removes the smell.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
This is a caged ceramic bearing for Edwards HCDP, iH80, and iH160 dry vacuum pumps . The caged ceramic construction provides superior durability and performance . This bearing supports the rotating components of the pump, promoting smooth and efficient operation .
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
10 in stock
10 in stock
10 in stock
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
10 in stock
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
10 in stock
10 in stock
This is a cylindrical roller bearing for Edwards E1M80 and E2M80 vacuum pumps.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.