$343.00
The KF25 to 3/4″ BSP Adaptor (Part # C10501714) is a Edwards fitting. It converts a KF25 (NW25) vacuum port to a 3/4 inch BSP male thread . This adaptor is often used to connect Edwards EMF oil mist filters to pump exhaust ports.
ADAPTOR KF25X3/4” BSP PK1
ADAPTOR KF25X3/4” BSP PK1
This adaptor is specifically designed to convert a KF25 (NW25) vacuum port into a 3/4 inch BSP male thread .
The most common use for this part is to connect an Edwards EMF oil mist filter to a vacuum pump .
Here is how it works:
The adaptor screws into the 3/4″ BSP female thread on the pump’s exhaust outlet.
The adaptor then provides a KF25 flange connection.
You use a KF25 clamp and centering ring to attach your EMF filter to the adaptor.
This is exactly how Edwards EMF10, EMF20, and other KF25 filters are installed on pumps with BSP threaded exhaust ports .
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The COUPLING COVER EH250/500 C/SEAL PK 1 is a complete replacement cover for the Edwards EH250 and EH500 mechanical booster pumps. It comes with the seal already included. This cover bolts onto the side of the pump where the motor connects. It protects the coupling area and holds the oil inside. If your existing cover is cracked, leaking oil, or damaged, this is the direct replacement you need. It fits both the EH250 and EH500 pump models .
10 in stock
10 in stock
10 in stock
10 in stock
10 in stock
The COUPLING BAFFLE EH500 is a replacement part made for the Edwards EH500 Mechanical Booster Pump. It sits inside the coupling-cover assembly. Its main job is to manage oil flow and reduce oil mist escaping from the gearbox area. This simple part helps keep your pump clean and running smoothly for longer.
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
10 in stock
The COUPLING BOSS FAN ASSEMBLIES is a replacement part set made for Edwards EH Series Mechanical Booster Pumps. This assembly includes both the coupling boss and the cooling fan. The coupling boss connects the motor to the pump drive. The fan attaches to the boss and keeps the coupling area cool during operation. If your pump runs hot or the drive feels loose, this assembly may need replacement. Get both parts together in one convenient set.
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.