$19.88
The NW10/16 Aluminium Swing Clamp (Part # C10512403) is a Edwards vacuum fitting. This is a lightweight swing clamp used to connect NW10 or NW16 (KF10/KF16) vacuum flanges. It is made of aluminum and features a hinged design for quick, tool-free connection and disconnection of vacuum lines
NW10/16 SWING CLAMP ALUMINIUM
NW10/16 SWING CLAMP ALUMINIUM
A swing clamp is a hinged clamp that wraps around two NW flanges. Unlike a standard clamping ring that uses a wing nut, a swing clamp has a built-in hinge and a simple clasp mechanism.
It is very fast: You just fold it over the flanges and snap it shut. No tools are required for basic installation.
It is lightweight: Made of aluminium, it is much lighter than a stainless steel clamp, which is helpful for portable or sensitive systems .
It is ideal for frequent changes: If you need to disconnect and reconnect vacuum lines often, a swing clamp is much faster than a traditional bolt clamp .
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
10 in stock
10 in stock
10 in stock
This is a bearing retainer, also known as a bearing cage, for Edwards vacuum pumps . Its job is to keep the rolling elements (balls or rollers) inside the bearing evenly spaced .
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
10 in stock
The COUPLING BAFFLE EH500 is a replacement part made for the Edwards EH500 Mechanical Booster Pump. It sits inside the coupling-cover assembly. Its main job is to manage oil flow and reduce oil mist escaping from the gearbox area. This simple part helps keep your pump clean and running smoothly for longer.
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
10 in stock
This is a single row ball bearing, size 6309, used on Edwards pump models . Single row ball bearings support radial loads and allow for smooth rotation. They consist of an outer ring, inner ring, cage, and balls that maintain separation between the rings .
This is a deep groove ball bearing for Edwards vacuum pumps and boosters. The dimensions are 62mm outer diameter, 30mm inner diameter, and 16mm width.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.