$22.05
The NW10/16 Polymer Swing Clamp (Part # C10512304) is a Edwards vacuum fitting. This is a lightweight, hinged “swing clamp” used to connect NW10 or NW16 (KF10/KF16) vacuum flanges . It is made of durable black polymer and features a hinged design for quick, tool-free connection and disconnection of vacuum lines .
NW10/16 SWING CLAMP POLYMER
NW10/16 SWING CLAMP POLYMER
A swing clamp is a hinged clamp that wraps around two NW flanges. Unlike a standard clamping ring that uses a wing nut, a swing clamp has a built-in hinge and a simple clasp mechanism .
It is very fast: You just fold it over the flanges and snap it shut. No tools are required for basic installation.
It is lightweight: Made of black polymer, it is lighter than metal clamps, which is helpful for portable or sensitive systems.
It is ideal for frequent changes: If you need to disconnect and reconnect vacuum lines often, a swing clamp is much faster than a traditional bolt clamp .
Corrosion Resistant: Polymer does not rust, making it a great choice for humid environments.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The COUPLING HUB RV PK1 is a genuine metal replacement part made for Edwards RV series rotary vane pumps. It fits RV3, RV5, RV8, and RV12 models . This hub is one of the metal pieces that attaches to the pump shaft. It works together with the rubber spider (coupling element) to connect the motor to the pump . If your RV pump is noisy or the coupling feels loose, this hub may be worn out. Replace it to get your pump running smooth again.
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
10 in stock
This reducer nipple is made for the Leybold Sogevac SV1200 vacuum pump . It connects a 3/4″ NPT female thread to a 1/2″ NPT female thread. This fitting allows you to attach smaller accessories or hoses to the larger port on your pump. A direct replacement that fits perfectly.
This is a Busch OEM (Original Equipment Manufacturer) part. It is made to fit and perform perfectly in your Busch vacuum pump. Always use the correct parts to ensure the longevity of your equipment.
10 in stock
This Oil Plug (Part #430020) is a replacement part made specifically for Busch Panda WV1000B and WV1000C vacuum pumps . It is a G3/8 threaded plug designed to seal the oil port on these pump models . Its job is to provide a tight, secure seal that prevents oil from leaking out of the pump. This plug is also included as a component in the official major overhaul kit for the WV1000B and WV1000C pumps
This G1/4 Oil Plug (Part #415000071) is a replacement part designed specifically for the Busch R5 160C vacuum pump . Its main job is to seal the oil port, preventing leaks and keeping your pump’s oil where it belongs. This simple but critical component ensures proper lubrication and helps extend the life of your pump.
This Clear Tube (Part #570000188A) is a replacement part designed specifically for Busch Seco SV1063B and SV1080B vacuum pumps . It measures 1 mm x 2 mm in diameter and is 0.44 meters long . The tube is made of clear material, which lets you see the fluid or gas flowing through it . This is a simple but important part that helps your pump .
This steel pipe nipple (Part #71215153) is made for the Leybold Sogevac SV1200 vacuum pump . It measures 1/2 inch in diameter and 6 inches in length . The nipple is threaded on both ends, allowing you to connect and extend plumbing pipes or fittings within your vacuum system . A direct replacement made of durable steel.
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
This 1-inch reinforced PVC tubing is designed for use with the Leybold Sogevac SV1200 vacuum pump . The tubing is made from durable polyvinyl chloride (PVC) with internal reinforcement for extra strength. It is flexible, resistant to chemicals and weathering, and is used for fluid and gas transfer in your vacuum system . A direct replacement that ensures reliable connections .
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.