$50.61
These Perforated Screens act like strainers inside your pump. Choose the screen for your model: #4503005 for DVP LC.12 or #4502009 for DVP LB.40. Replace or clean them during routine maintenance to keep your pump running strong.
Screen, Perforated - DVP LB.40, Part # 4502009PP
Screen, Perforated - DVP LB.40, Part # 4502009PP
Your DVP vacuum pump works hard every day. It pulls air, oil, and sometimes tiny particles along with it. Over time, those small particles add up. They can scratch parts, block oil flow, and ruin your vacuum.
That is where a perforated screen comes in. Think of it as a strainer, like the one you use in your kitchen sink. The tiny holes in the screen catch debris while letting the oil or air pass through freely
DVP uses perforated screens in different pump models. Here are the two we carry:
For DVP LC.12 pumps – Part #4503005
This screen fits the DVP LC.12 model, a lubricated rotary vane pump. It is typically located in the oil system or at an inlet port.
For DVP LB.40 pumps – Part #4502009
This screen fits the DVP LB.40 model. The LB.40 is a larger, industrial-grade pump. The screen protects critical internal passages from debris.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
Keep your DVP lubricated vane pump running clean with this air-oil separator / oil separator filter. Made specifically for DVP LB40, LB60, LC40, and LC60 pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
This G1 Oil Sight Glass (Part # 550050) lets you quickly check the oil level and condition in your DVP vacuum pump. It fits directly into the pump housing with a standard G1 thread. If your current sight glass is cracked, cloudy, or leaking, replace it with this part.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
This is a Square Cork Gasket with part number 4901044 for DVP LB.40 series vacuum pumps. It is designed to seal square or rectangular port connections on the pump. Made from high-quality cork, it provides a reliable seal against air leaks and oil seepage.
10 in stock
This Tolerance Ring (Part # 1601014PP) helps adjust the internal clearance of your pump. It measures 35mm in outer diameter and is 12mm thick. A simple replacement part that restores pumping efficiency and prevents metal-on-metal wear inside your LB 40 pump model.
10 in stock
This is the Case Gasket (Part # 4901067PP) for DVP LB.40 series vacuum pumps. It seals the two main halves of the pump housing. You must replace this gasket every time you open the pump case for maintenance or repair to prevent oil leaks.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.