$5.67
This Cork Case Gasket (Part #300165) is made specifically for the Pfeiffer DUO 2.5 vacuum pump. It goes between the two main halves of the pump body. Its job is to create a tight, reliable seal. This stops oil from leaking out. It also stops air from leaking in. A good seal means your pump holds strong vacuum pressure. If you are opening the pump for maintenance or a minor repair, you must replace this gasket. It is a one-time-use part .
Case Gasket, Cork-Pfeiffer DUO, Part# 300165
Case Gasket, Cork-Pfeiffer DUO, Part# 300165
This is a flat, sheet-like gasket made from cork. Its part number is 300165. You place it between the two main halves of the pump’s outer body, also called the “case” . Think of it like the rubber seal on a jar lid. Without it, the jar would not stay closed tightly. With it, everything stays sealed and secure.
This cork case gasket is made specifically for one pump model:
Pfeiffer DUO 2.5
If you own this pump and are doing any repair work that requires opening the case, this is the correct gasket for the job.
The job of this gasket is critical for your pump’s health.
Prevents oil leaks: It stops oil from seeping out where the two case halves meet.
Maintains vacuum: It stops outside air from being sucked into the pump. This keeps your vacuum pressure strong and stable.
Keeps dirt out: A good seal also stops dust and debris from entering the pump from the outside.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
This Viton O-Ring (Part #320176) is a critical sealing component for your small Pfeiffer DUO vacuum pump . It measures 15 mm (inner diameter) x 1.5 mm (cross section). Made from Viton, a high-performance synthetic rubber, this O-ring creates a tight, reliable seal. It prevents leaks and keeps your vacuum pressure strong.
This O-ring is designed for the Pfeiffer DUO 2.5, DUO 2.5C, DUO 5, and DUO 5C pump models . If you are rebuilding your pump, this O-ring is a must-have part. In fact, it is included as a standard component in the Seal Kit for the DUO 5 / DUO 5C (Part # PKE30005T) , where two of these O-rings are used , as well as in the Seal Kit for the DUO 2.5C (Part # PKE00020T) and the Major Overhaul Kit for the DUO 5C (Part # PKE32006T) .
10 in stock
10 in stock
This Ring Gasket (Part #300057) is a critical sealing component for your Pfeiffer vacuum pump. It is made from Viton, a high-performance rubber material. This gasket creates a tight seal between different parts inside the pump. It stops leaks and keeps the vacuum pressure strong. This ring gasket fits the Pfeiffer DUO 2.5 and DUO 2.5C pump models . If you are doing any repair work on these pumps, you will likely need this gasket.
10 in stock
10 in stock
This Viton O-Ring (Part #320174) is a critical sealing component for your small Pfeiffer DUO vacuum pump . It measures 16 mm (inner diameter) x 1.0 mm (cross section). Made from Viton, a high-performance synthetic rubber, this O-ring creates a tight, reliable seal. It prevents leaks and keeps your vacuum pressure strong.
This O-ring is designed for the Pfeiffer DUO 2.5 and DUO 2.5C pump models . If you are rebuilding your pump, this O-ring is a must-have part. In fact, it is included as a standard component in the Seal Kit for the DUO 2.5C (Part # PKE00020T) , where two of these O-rings are used , as well as in the Minor Kit for the DUO 2.5 (Part # 194324) , which contains one of these O-rings .
10 in stock
10 in stock
This GX Vane (Part #230064) is a replacement part made specifically for Pfeiffer DUO2.5 and DUO2.5C vacuum pumps . Vanes are the heart of a rotary vane pump. They slide in and out of the rotor, creating the seal that compresses gas and generates vacuum pressure. Made from durable high-strength GX material, this component is critical for maintaining the efficiency and reliability of your pump . If you are rebuilding your pump, you will need one of these vanes for a complete overhaul .
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.