$702.80
The Filter Element Glass/Steel 212J (Part # 085-052-263) is a replacement part for the Edwards Microvac 212J rotary piston vacuum pump . This is the exhaust filter element that captures oil mist from the pump’s outlet. It is made from glass fiber and steel . The 212J is a large industrial pump that moves 150 CFM .
FILTER ELEMENT GLASS/STEEL 212J
FILTER ELEMENT GLASS/STEEL 212J
This element is the heart of the exhaust filter on the 212J pump. It is made from glass fiber and steel . Here is how it works:
Hot exhaust gas from the pump enters the filter housing.
The gas passes through this filter element.
The glass fiber catches the tiny oil droplets. The oil coalesces (joins together) and drips down.
The oil collects in the bottom of the filter housing.
Clean air leaves the filter.
This filter element is designed for the specific flow rate and oil mist characteristics of the 212J pump. That is why you need the correct part.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
This is a bearing retainer, also known as a bearing cage, for Edwards vacuum pumps . Its job is to keep the rolling elements (balls or rollers) inside the bearing evenly spaced .
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
10 in stock
This is a D-Row single ball bearing used on Edwards XDS scroll pumps . It fits models XDS5, XDS5C, XDS10, and XDS10C.
This is a deep groove ball bearing for Edwards vacuum pumps and boosters. The dimensions are 62mm outer diameter, 30mm inner diameter, and 16mm width.
10 in stock
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.