$17.78
The NW25 Stainless Steel Clamping Ring (Part # C10514501) is a Edwards vacuum fitting. This is the standard stainless steel clamp used to connect two NW25 (KF25) vacuum flanges. It is labeled
NW25 ST.ST CLAMPING RING - CU FREE
NW25 ST.ST CLAMPING RING - CU FREE
This specific clamp is designed for NW25 (KF25) flanges . It is a key component for building foreline vacuum plumbing and process systems
Based on standard Edwards NW25 clamps, the approximate dimensions are :
A (Width): 60 mm (2.36 inches)
B (Height): 60 mm (2.36 inches)
C (Depth): 48 mm (1.89 inches)
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
This is a caged ceramic bearing for Edwards HCDP, iH80, and iH160 dry vacuum pumps . The caged ceramic construction provides superior durability and performance . This bearing supports the rotating components of the pump, promoting smooth and efficient operation .
10 in stock
10 in stock
This is a bearing retainer, also known as a bearing cage, for Edwards vacuum pumps . Its job is to keep the rolling elements (balls or rollers) inside the bearing evenly spaced .
10 in stock
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
10 in stock
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
10 in stock
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.