$7.21
This is the Viton O-ring, size 102 mm x 3 mm. It is part number 486000650. This ring is used on Busch Panda pump models WV1000B, WV1000C, WV1500B, and WV1500C . Made from tough Viton (FKM) rubber, it resists high heat and harsh chemicals. You will find this exact O-ring inside major repair kits like the Seal Kit 990520941 for WV1500B/C pumps, the Gasket Kit 990000503 for WV1000B/C pumps, and the Overhaul Kit 994520940 . If your pump is leaking, this is the right part.
O-ring, 102 x 3 mm - Viton, Part# 486000650
O-ring, 102 x 3 mm - Viton, Part# 486000650
The problem might be a rubber ring. That ring is called an O-ring. It sits between two metal parts. Its only job is to stop air and oil from escaping.
We have the exact replacement you need. This is the Viton O-ring, 102 x 3 mm. The part number is 486000650.
This O-ring is made for specific Busch Panda pumps. Before you buy, check your pump model. This ring fits the following models :
Busch Panda WV1000B
Busch Panda WV1000C
Busch Panda WV1500B
Busch Panda WV1500C
Not all rubber is the same. Standard rubber works okay at room temperature. But vacuum pumps get hot. They also touch oils and chemicals. Standard rubber can harden, crack, and fail.
This O-ring is made from Viton (also called FKM or FPM)
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
This is the official Busch SCREW, M6X20 LONG (Part #413000342). It is a direct replacement screw built specifically for Busch Panda vacuum pumps. If you own a WV1500B or WV1500C model, this is the right part for the job. Keep your vacuum system running smoothly with factory-spec hardware.
This FKM (Viton) O-ring measures 85 mm by 3 mm. It is used in Busch and Leybold vacuum pumps, including Trivac, Panda, and COBRA models. Made from durable Viton rubber to handle high heat and chemicals. A perfect fit for your pump repair or maintenance job.
This roller bearing keeps the rotating parts inside your Busch vacuum pump moving smoothly. It fits Panda WV250B, WV250C, WV500B, WV500C, and NeoDry 15E/30E models. If your pump is noisy or running rough, a worn bearing could be the problem.
This coated sleeve protects the rotating shaft inside your Busch vacuum pump. It is made for NeoDry 15E/30E and Panda WV250B/WV500B models. The special coating reduces friction and stops corrosion. If you are rebuilding your pump, this is a key part you will need.
Complete seal kit for Busch Panda WV1500B and WV1500C vacuum pumps. Includes O-rings, bypass discs, oil sight glasses, and both shaft seals. Everything needed to stop leaks and restore seal integrity.
10 in stock
This is the official Busch Ring Shim (Part #433000058). It is a direct replacement part made for Busch Panda vacuum pumps. This ring shim fits four popular models: WV1000B, WV1000C, WV1500B, and WV1500C . A shim is a thin, piece used to fill small gaps or adjust spacing between parts. This ensures everything fits together perfectly and your pump operates smoothly.
vacuum pump sealed tight with this 85mm x 3mm Viton O-Ring. Part# 980333 is made from high-quality FKM (Viton) rubber. It resists heat, oils, and chemicals. This is a direct replacement part for Alcatel-Adixen, Ebara, and Busch pumps including ACP15, A30W, A70W, and WV1500 series. Stop leaks and maintain strong vacuum pressure.
10 in stock
Keep your Busch vacuum pump running smoothly with this sight glass ring gasket. This is part number 480000272. It is made to fit Busch Panda models WV1000B and WV1000C. This small but important part creates a tight seal around the sight glass. It stops oil from leaking out. It also keeps dirt from getting into your pump. If you see oil around your sight glass, it is time to change this gasket.
This is a double shaft seal for Busch Panda vacuum pumps. It features a tandem double-lip design that provides a much tighter seal than single-lip versions. Fits WV1000B, WV1000C, WV1500B, and WV1500C models. Perfect for major repairs or complete pump overhauls.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.