$41.09
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
Separator, Air-Oil, DVP, LC150, Part# 1801063
Separator, Air-Oil, DVP, LC150, Part# 1801063
This filter is made specifically for the DVP LC150 vacuum pump . It is also compatible with LC151, LC151WR, and LC151 Kzero models .
The DVP LC150 is a single-stage, rotary vane vacuum pump with an oil recirculating lubrication system . It has a pumping speed of 150 m³/h and an ultimate vacuum of 0.5 mbar .
The separator contains special filter material. As the air-oil mixture passes through, the oil droplets get trapped. The clean air passes through. The trapped oil drains back into the pump.
A good quality separator leaves only 1 to 3 parts per million of oil in the exhaust air . That means almost no oil mist comes out.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB 40 and SC 40 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
DVP LC.20 pump sealed tight. This Case Gasket (Part # 4901072) goes between the pump body and the end cover. Replace it every time you open the pump for service. It stops air leaks and keeps your vacuum strong.
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
10 in stock
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Keep your DVP LC 25 vacuum pump running clean with this air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit .
Keep your DVP LB.40 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP LB.40 vacuum pump sealed tight with this genuine ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP lubricated vane pump running clean with this air-oil separator / oil separator filter. Made specifically for DVP LB40, LB60, LC40, and LC60 pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.