$77.00
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
DVP Exhaust Filter, Part# 1801033
DVP Exhaust Filter, Part# 1801033
This is an exhaust filter / air-oil separator (Part # 1801033). It is also called an oil mist filter.
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump
This filter fits the following DVP pump models :
LB 100
LB 180
LB 250
LC 105
LC 205
LC 305
These are all lubricated rotary vane vacuum pumps . They use oil for sealing and lubrication. That is why they need a good exhaust filter
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Keep your DVP LC 25 vacuum pump running clean with this air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit .
10 in stock
Keep your DVP LB.40 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP LC.105 or LC.150 vacuum pump sealed tight with this copper ring gasket. Made from soft copper that compresses to form a perfect seal. Ideal for high-temperature areas where rubber gaskets would fail. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB40, LB60, LB100, and LC series pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB and SC series dry-running vane pumps in sizes 60 through 140 . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
DVP LC.20 pump sealed tight. This Case Gasket (Part # 4901072) goes between the pump body and the end cover. Replace it every time you open the pump for service. It stops air leaks and keeps your vacuum strong.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.