$22.05
The NW25 Aluminium Swing Clamp (Part # C10514403) is a Edwards vacuum fitting. This is a lightweight, hinged “swing clamp” used to connect two NW25 (KF25) vacuum flanges . It is made of durable aluminum and features a hinged design for quick, tool-free connection and disconnection of vacuum lines . It is easier to use than traditional stainless steel clamping rings .
NW25 SWING CLAMP ALUMINIUM
NW25 SWING CLAMP ALUMINIUM
A swing clamp is a hinged clamp that wraps around two NW flanges. Unlike a standard clamping ring that uses a wing nut, a swing clamp has a built-in hinge and a simple clasp mechanism.
It is very fast: You just fold it over the flanges and snap it shut. No tools are required for installation.
It is lightweight: Made of aluminum, it is much lighter than a stainless steel clamp, which is helpful for portable or sensitive systems .
It is ideal for frequent changes: If you need to disconnect and reconnect vacuum lines often, a swing clamp is much faster than a traditional bolt clamp.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
10 in stock
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
This is a single row ball bearing, size 6309, used on Edwards pump models . Single row ball bearings support radial loads and allow for smooth rotation. They consist of an outer ring, inner ring, cage, and balls that maintain separation between the rings .
This is an S-Row ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
This is a caged ceramic bearing for Edwards HCDP, iH80, and iH160 dry vacuum pumps . The caged ceramic construction provides superior durability and performance . This bearing supports the rotating components of the pump, promoting smooth and efficient operation .
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
The COUPLING BOSS FAN ASSEMBLIES is a replacement part set made for Edwards EH Series Mechanical Booster Pumps. This assembly includes both the coupling boss and the cooling fan. The coupling boss connects the motor to the pump drive. The fan attaches to the boss and keeps the coupling area cool during operation. If your pump runs hot or the drive feels loose, this assembly may need replacement. Get both parts together in one convenient set.
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.