$24.43
The NW25 Polymer Swing Clamp (Part # C10514304) is a Edwards vacuum fitting. This is a lightweight, hinged “swing clamp” used to connect two NW25 (KF25) vacuum flanges . It is made of durable black polymer and features a hinged design for quick, tool-free connection and disconnection of vacuum lines .
NW25 SWING CLAMP POLYMER
NW25 SWING CLAMP POLYMER
A swing clamp is a hinged clamp that wraps around two NW flanges. Unlike a standard clamping ring that uses a wing nut, a swing clamp has a built-in hinge and a simple clasp mechanism.
It is very fast: You just fold it over the flanges and snap it shut. No tools are required for installation.
It is lightweight: Made of black polymer, it is lighter than metal clamps, which is helpful for portable or sensitive systems .
It is ideal for frequent changes: If you need to disconnect and reconnect vacuum lines often, a swing clamp is much faster than a traditional bolt clamp .
Corrosion Resistant: Polymer does not rust, making it a great choice for humid or chemical environments.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
The Flange NW25 Outlet Adapter (Part # C10501414) is a Edwards vacuum fitting. It is specifically designed to convert a 3/4 inch BSP (British Standard Pipe) female thread to a NW25 (KF25) vacuum flange .This adapter is essential for connecting standard NW25 accessories—such as oil mist filters , valves, or vacuum gauges —to the exhaust port of many Edwards rotary vane and scroll pumps.
This Oil Plug (Part #430020) is a replacement part made specifically for Busch Panda WV1000B and WV1000C vacuum pumps . It is a G3/8 threaded plug designed to seal the oil port on these pump models . Its job is to provide a tight, secure seal that prevents oil from leaking out of the pump. This plug is also included as a component in the official major overhaul kit for the WV1000B and WV1000C pumps
The Coupling Flange (Part # C11004040) is a Edwards vacuum component. It is a KF16 (NW16) standard flange used to connect vacuum tubing, hoses, and accessories . This flange is part of the ISO-KF quick-flange system. It is made of metal (typically stainless steel or aluminum) and is designed to create a leak-tight vacuum seal. It works with a centering ring and a clamp .
The COUPLING BAFFLE EH500 is a replacement part made for the Edwards EH500 Mechanical Booster Pump. It sits inside the coupling-cover assembly. Its main job is to manage oil flow and reduce oil mist escaping from the gearbox area. This simple part helps keep your pump clean and running smoothly for longer.
The COUPLING COVER EH250/500 C/SEAL PK 1 is a complete replacement cover for the Edwards EH250 and EH500 mechanical booster pumps. It comes with the seal already included. This cover bolts onto the side of the pump where the motor connects. It protects the coupling area and holds the oil inside. If your existing cover is cracked, leaking oil, or damaged, this is the direct replacement you need. It fits both the EH250 and EH500 pump models .
10 in stock
The ISO40 Bolted to ISO63 Adapter (Part # C10007087) is a Edwards vacuum fitting. It is made of stainless steel (S/S) . This adapter connects a component with an ISO63 bolted flange to a component with an ISO40 bolted flange .It is commonly used to connect Edwards dry pumps (like the QDP or iQDP series) to booster pumps (like the QMB series)
The COUPLING HUB RV PK1 is a genuine metal replacement part made for Edwards RV series rotary vane pumps. It fits RV3, RV5, RV8, and RV12 models . This hub is one of the metal pieces that attaches to the pump shaft. It works together with the rubber spider (coupling element) to connect the motor to the pump . If your RV pump is noisy or the coupling feels loose, this hub may be worn out. Replace it to get your pump running smooth again.
10 in stock
10 in stock
The COUPLING BOSS FAN ASSEMBLIES is a replacement part set made for Edwards EH Series Mechanical Booster Pumps. This assembly includes both the coupling boss and the cooling fan. The coupling boss connects the motor to the pump drive. The fan attaches to the boss and keeps the coupling area cool during operation. If your pump runs hot or the drive feels loose, this assembly may need replacement. Get both parts together in one convenient set.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.