worn shaft seal with this Edwards Buna seal. Part number 02109066B (also listed as SB0034) is made from Buna rubber. It fits many popular Edwards pumps including the E2M2, E2M5, E2M8, E2M12, and RV3, RV5, RV8, RV12 models. This is the standard rubber seal for general use.
Replace the worn shaft seals on your Edwards dry pump with this part. Part number 40805732 is designed for the iL70 and iL600 dry pump systems. These pumps operate without oil in the pumping chamber, making shaft seals critical for keeping the pump sealed and clean.
10 in stock
Edwards pump with this Viton part. Part number 02109076 (also listed as SV0071) is designed specifically for the E2M275 and E1M275 models. The Viton material handles high heat and harsh chemicals better than standard rubber.
Replace the worn shaft seal on your small Edwards pump with this part. Part number 02109078 (also listed as SB0087) fits the E2M0.7, E2M1, and E2M1.5 models. This is a Viton seal that handles heat and chemicals better than standard rubber.
Replace the worn shaft seal on your small Edwards pump with this Viton part. Part number 02109079 (also listed as SB0088) fits the E2M0.7, E2M1, and E2M1.5 models. This is a metal-cased Viton seal with dimensions of 16mm x 30mm x 7mm . It handles heat and chemicals better than standard rubber.
Replace the high-speed shaft seal on your Edwards EH Booster pump with this part. Part number 02109077 is a Viton seal used on the EH250 and EH500 models. It is designed for the unique demands of mechanical booster pumps, handling high speeds and differential pressures.
Upgrade your pump seal to Teflon (PTFE) for maximum chemical resistance. Part number 02109052 is a PTFE shaft seal. It is designed for applications where standard rubber or even Viton seals are not enough. This seal handles almost every chemical without swelling or breaking down.
Upgrade your vacuum pump with a seal that can take the heat. The Edwards Shaft Seal, Viton (Part #02109075) is a premium replacement part. It is made of special rubber called Viton. This material resists high temperatures and harsh chemicals much better than standard rubber. If your pump runs hot or handles tough gases, this is the right seal for you.
A shaft sleeve solves this problem. It is a thin, hard metal tube that slides over your worn shaft. It creates a brand new, perfectly smooth surface for the new seal to ride against.
Install a shaft sleeve with your next shaft seal replacement. The oil leak will stop.
The Shaft X (Driving) is a direct replacement part for Edwards dry vacuum pumps. It fits specifically the DP400 and EDP400 models. This is the main drive shaft. It connects directly to the motor. It transfers all the motor’s power to the pump’s internal rotors. If this shaft wears out or breaks, your pump will not work at all. Replace it and get your pump back to full operation.
The Shaft Y (Driven) is a direct replacement part for Edwards dry vacuum pumps. It fits specifically the DP400 and EDP400 models. This shaft works together with the drive shaft to turn the pump’s internal rotors. Without a good shaft, the pump cannot create a proper vacuum. If your pump is noisy or performing poorly, a worn shaft could be the problem.
Adjust the bearing clearance on your Edwards dry pump with this shim. Part number 40801058 (also listed as A40801758) is a 0.10 thickness shim designed for the iH80 and iH160 dry pump models. This shim ensures proper alignment of internal components for optimal pump performance.
Get a full pack of 10 Edwards shims for your vacuum pump repairs. Part number A30301731 (also listed as 30301731) is a 0.025 thickness shim. These thin metal spacers are used to adjust alignment, set clearances, and fill small gaps between mating parts. Having a pack of 10 means you have extras for multiple adjustments or future rebuilds.
Not a member? Create an account
Already got an account? Sign in here
