$69.30
This is a bearing retainer, also known as a bearing cage, for Edwards vacuum pumps . Its job is to keep the rolling elements (balls or rollers) inside the bearing evenly spaced .
BEARING RETAINER
BEARING RETAINER
This bearing retainer is a Edwards part . It is made to fit Edwards vacuum pumps and boosters.
The part number is 607-387-001 . Always match this number to be sure you get the right retainer for your pump.
A bearing retainer is the part inside a bearing that holds the balls or rollers in place. It is also called a bearing cage. It keeps the rolling elements from touching each other . It makes sure they stay evenly spaced around the bearing.
The bearing retainer does the same job for the little balls inside your bearing.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
10 in stock
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
This is a caged ceramic bearing for Edwards HCDP, iH80, and iH160 dry vacuum pumps . The caged ceramic construction provides superior durability and performance . This bearing supports the rotating components of the pump, promoting smooth and efficient operation .
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
10 in stock
10 in stock
This is a deep groove ball bearing for Edwards vacuum pumps and boosters. The dimensions are 62mm outer diameter, 30mm inner diameter, and 16mm width.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.