Busch Major Repair Kit with GX Vanes & Filters – Busch R5 0502B Part# BMKF022

We put together every single part you need for a full rebuild – both the mechanical parts AND the filters. Here is what you get :

The Heart – GX Vanes (3 pieces)
These are the most important parts of your pump. The GX vanes (part# 722516054) are made from G11 fiberglass composite laminate with an epoxy resin binder . This material is very strong. It has high tensile strength. It does not soak up moisture. For standard industrial applications, GX vanes are a great choice .

The Filters – Complete Filtration System

• Eight Exhaust Filters with Built-in Silencer (503 mm long, part# 532917864) – These are the main filters for your pump. Each filter is 503 mm long and has a built-in silencer that makes your pump run much quieter . The 0502B uses eight exhaust filters to handle its high airflow .

• Oil Filter (part# 53100500) – Removes dirt and tiny metal particles from the oil. Clean oil means your pump lasts much longer .

• Two Baffle Strainers (part# 53703400 and 53704200) – Catch large particles before they enter the pump. Extra protection for your pump’s internal parts .

The Seals – Shaft Seals (4 pieces)
These stop oil from leaking out where the pump shaft comes out. All four are made of Viton rubber (part# 48703200) . Viton handles high heat and chemicals very well.

The Bearings

• Needle Bearings (2 pieces, part# 47300900) – keep your pump spinning smoothly

• Bearing Sleeves (2 pieces, part# 47201100 and 47201000) – protect the shaft where the bearings ride 

The Gaskets (10+ pieces)
A full set of gaskets for the 0502B pump :

• Cylinder/exhaust box gasket (part# 48011100) 

• Exhaust box cover gasket (part# 48013100) 

• Side cover plate gasket (part# 48013400) 

• Oil sight glass gasket (part# 48023100) 

• Oil fill plug gasket (part# 48210600) 

• Oil cooler gaskets (2 pieces, part# 480537332) 

• Float valve cover gasket (part# 481532126) 

• Float valve gasket (part# 481529712) 

• Various ring gaskets (part# 48403400, 48404000, 48406200) 

• Copper ring gasket (part# 48402900) – copper seals very well under pressure 

The O-rings (25+ pieces in different materials)

Viton O-rings (high heat resistance) :

• 35 x 4 mm (8 pieces, part# 48651200) – most common size in this kit 

• 25 x 2 mm (2 pieces, part# 48656100) 

• 22 x 2 mm (1 piece, part# 48650500) 

• 28 x 3 mm (1 piece, part# 79509) 

• 8 x 2 mm (2 pieces, part# PL23970149) 

• 140 x 5 mm (2 pieces, part# 48656700) 

• 97 x 5 mm (1 piece, part# 48661100) 

• 265 x 4 mm (2 pieces, part# 48654900) 

• 266.3 x 3.53 mm (2 pieces, part# 486903988) 

• O-ring, FKM (4 pieces, part# 48652100) 

Silicone O-ring cord:

• 420 mm long silicone cord (part# 48206600-420MM) – you cut this to the exact length you need. Silicone handles high temperatures very well 

The Valves and Hardware

• Inlet ball valve (part# 73001800) – made of Viton, controls gas flow into the pump 

• Threaded taper pins (4 pieces, part# 43708000) – hold the pump housing together securely 

• Hex nuts (2 pieces, part# 42000700) – M8 size 

The Oil System Components

• Oil sight glass (part# 83623) and sight glass assembly (part# 500015PP) – lets you see oil level and condition 

• Oil drain plug (part# 710000010) – nylon, 1/2 inch. Old plugs can crack and leak