$17.29
This is a replacement vane with part number 3301011 for DVP dry vane vacuum pumps . It fits models CA16, CB16, CC16, and SA16 . This vane is a vacstellar-engineered component that ensures reliable and efficient pump operation
Vane, DVP, Dry Vane, CA/CB/CC/SA 16, Part# 3301011
Vane, DVP, Dry Vane, CA/CB/CC/SA 16, Part# 3301011
Dry vane pumps run without oil. That means the vanes inside do all the hard work. They slide in and out as the pump turns. This action seals the chamber and moves the air out.
When vanes wear down, your pump loses power. It cannot pull a strong vacuum anymore. The fix is simple: replace the old vanes with new ones.This vane sits inside a slot on the pump rotor. As the rotor spins, the vane slides out and presses against the pump wall. This creates a tight seal. That seal stops air from leaking back. The result is strong, steady vacuum power.
This vane is made specifically for DVP dry vane pumps. It fits these models :
DVP CA16
DVP CB16
CC 16
SA 16
It may also fit the SB 16 model .
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP LB.40 vacuum pump sealed tight with this genuine ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB and SC series dry-running vane pumps in sizes 60 through 140 . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
Keep your DVP LC.150 or LC.105 vacuum pump sealed tight with this cork case gasket. This gasket fits between the main housing sections of your pump. It prevents air from leaking in and oil from leaking out. Made from durable cork material that resists oil and compresses to form a tight seal. OEM quality direct replacement.
Keep your DVP LC.105 or LC.150 vacuum pump sealed tight with this copper ring gasket. Made from soft copper that compresses to form a perfect seal. Ideal for high-temperature areas where rubber gaskets would fail. OEM quality direct replacement.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB 18 and LB 25 lubricated vane pumps. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
10 in stock
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.