$1,355.90
The Edwards MF30 Oil Mist Filter (Part # 46233000) is a exhaust filter for larger Edwards rotary vane vacuum pumps . It is specifically designed for the E2M28 and E2M30 pump models . This filter captures oil mist before it can escape into your workspace.
Edwards Mist Filter, Part# 46233000
Edwards Mist Filter, Part# 46233000
The MF30 has a strong cast aluminum body . Inside, there are two filter elements that work together .
Step 1 – Catching the oil. The exhaust gas enters the filter and passes through a special oil filter element. This element is made from epoxy impregnated glass fiber . It acts like a very fine net. It catches tiny oil droplets. The oil then drips down and collects in the bottom of the filter. You can see how much oil has been collected through the sight panel on the side of the filter . When it gets full, you just open the drain plug at the bottom and let the oil out .
Step 2 – Killing the smell. After the air passes through the oil filter, it goes through an odor element. This absorbs any remaining oil vapor and odors . So the air that finally leaves the filter is clean and smells like nothing.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
10 in stock
The COUPLING BAFFLE EH500 is a replacement part made for the Edwards EH500 Mechanical Booster Pump. It sits inside the coupling-cover assembly. Its main job is to manage oil flow and reduce oil mist escaping from the gearbox area. This simple part helps keep your pump clean and running smoothly for longer.
The COUPLING COVER EH250/500 C/SEAL PK 1 is a complete replacement cover for the Edwards EH250 and EH500 mechanical booster pumps. It comes with the seal already included. This cover bolts onto the side of the pump where the motor connects. It protects the coupling area and holds the oil inside. If your existing cover is cracked, leaking oil, or damaged, this is the direct replacement you need. It fits both the EH250 and EH500 pump models .
10 in stock
This is a deep groove ball bearing for Edwards vacuum pumps and boosters. The dimensions are 62mm outer diameter, 30mm inner diameter, and 16mm width.
This is a cylindrical roller bearing for Edwards E1M80 and E2M80 vacuum pumps.
10 in stock
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.