$99.40
The NW25/10 Reducer (Part # C10514446) is a Edwards vacuum fitting. It is used to connect a larger NW25 (KF25) vacuum component to a smaller NW10 (KF10) component . This reducer is made of high-quality 316L stainless steel (SUS316L) for excellent durability and corrosion resistance .
NW25/10 REDUCER STAINLESS STEEL
NW25/10 REDUCER STAINLESS STEEL
This reducer is made of AISI 316L stainless steel (SUS316L) . This is the standard material for high-quality vacuum fittings because:
Excellent corrosion resistance: It stands up to chemicals, moisture, and aggressive process gases.
Low outgassing: It releases very little gas into your vacuum system.
Strength and durability: It will not bend, warp, or crack under stress.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
This is a cylindrical roller bearing for Edwards E1M80 and E2M80 vacuum pumps.
10 in stock
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
10 in stock
10 in stock
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
This is a caged ceramic bearing for Edwards HCDP, iH80, and iH160 dry vacuum pumps . The caged ceramic construction provides superior durability and performance . This bearing supports the rotating components of the pump, promoting smooth and efficient operation .
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
This is a single row ball bearing, size 6309, used on Edwards pump models . Single row ball bearings support radial loads and allow for smooth rotation. They consist of an outer ring, inner ring, cage, and balls that maintain separation between the rings .
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.