$18.76
Keep dirt out of your DVP LC.12 pump. This Perforated Screen (Part # 4503005) acts like a strainer. It catches small particles and debris before they can damage sensitive internal parts. Check and clean this screen during routine maintenance.
Screen, Perforated, DVP LC.12 - Part # 4503005PP
Screen, Perforated, DVP LC.12 - Part # 4503005PP
Your DVP LC.12 vacuum pump works hard every day. It pulls air and sometimes tiny particles along with it. Over time, those small particles add up.
That is where the perforated screen comes in. Think of it as a strainer or a filter. It sits inside the pump where oil or air flows through. The tiny holes in the screen catch debris while letting the oil or air pass freely.
On the DVP LC.12 pump, a perforated screen is typically found in one of these places:
At the oil inlet or outlet.
Inside the oil return line.
At the gas ballast valve.
Protecting a small internal passage.
The exact location can vary, but the job is always the same. Stop debris before it causes damage.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This is a replacement vane with part number 3302042 for the DVP LC.12 lubricated vane vacuum pump . This vane is an essential component that helps generate flow by sliding against the pump’s internal surfaces .
Keep your DVP LB.40 vacuum pump sealed tight with this genuine ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB100, LB180, LB250, LC105, LC205, and LC305 lubricated vane pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Air-Oil Separator is used on DVP brand of LB100 Lubricated vane pump system.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB 40 and SC 40 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
10 in stock
10 in stock
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
This is a replacement vane with part number 3302042 for the DVP LC.12 lubricated vane vacuum pump . This vane is an essential component that helps generate flow by sliding against the pump’s internal surfaces . Each vane weighs 0.010 kg
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
Keep your DVP vacuum pump running clean with this exhaust filter / air-oil separator. Made for DVP LB 18 and LB 25 lubricated vane pumps. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB and SC series dry-running vane pumps in sizes 60 through 140 . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.