$31.15
This is a shaft seal for DVP vacuum pumps. It measures 25mm inside, 37mm outside, and is 5mm thick. It carries part number 901016PP. This seal stops oil from leaking out where the drive shaft enters the pump body. If you see oil dripping from the front of your pump near the shaft, a worn seal is likely the problem. This OEM-quality part brings back a tight seal and stops those annoying leaks.
Shaft Seal, 25x37x5 - Part # 901016PP
Shaft Seal, 25x37x5 - Part # 901016PP
This shaft goes from the motor into the pump body. The shaft needs to spin freely. But you also need to keep the oil inside the pump.
That is what this seal does. It wraps around the shaft where it enters the pump. It lets the shaft spin while keeping the oil from leaking out.Shaft seals with these dimensions are used on smaller industrial vacuum pumps. This size is common on pumps like the DVP LC.12 and similar models in the 12 m³/h range.
This is a genuine OEM-quality part. It is made to the same standards as the original DVP part. It fits right the first time. No guessing. No forcing. Just a clean, proper fit.
A good seal stops leaks. No more oil on your floor. No more adding oil every week. Just a pump that works the way it should.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LC 25 vacuum pump running clean with this air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit .
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
10 in stock
10 in stock
Keep your DVP LB.40 vacuum pump sealed tight with this genuine ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
10 in stock
Keep your DVP LC.12 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
10 in stock
Keep your DVP LC.105 or LC.150 vacuum pump sealed tight with this copper ring gasket. Made from soft copper that compresses to form a perfect seal. Ideal for high-temperature areas where rubber gaskets would fail. OEM quality direct replacement.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.