$98.70
This is a replacement vane with part number 3302048 for DVP lubricated vane vacuum pumps . This vane is an essential component that helps generate flow by sliding against the pump’s internal surfaces
Vane, DVP, Part# 3302048
Vane, DVP, Part# 3302048
This vane sits inside a slot on the pump rotor. As the rotor spins, the vane slides out and presses against the pump wall. This creates a tight seal. That seal stops air and fluid from leaking back. The result is strong, steady vacuum power .This vane is designed for DVP brand lubricated vane pumps . The product page mentions compatibility with models like the LB8 . Always check your pump’s manual to confirm the correct part number for your specific model.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB and SC series dry-running vane pumps in sizes 60 through 140 . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
Keep your DVP LC.12 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
20 in stock
10 in stock
DVP LC.20 pump sealed tight. This Case Gasket (Part # 4901072) goes between the pump body and the end cover. Replace it every time you open the pump for service. It stops air leaks and keeps your vacuum strong.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SA 16 and SB 16 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
This Air Filter, DVP, SA 16 is used on SA16 pump model. It serves a technical role in maintaining the cleanliness and quality of the incoming air or gas.
10 in stock
Keep your DVP lubricated vane pump running clean with this air-oil separator / oil separator filter. Made specifically for DVP LB40, LB60, LC40, and LC60 pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.