The NW25 Polymer Centering Ring (Part # C10514394) is a Edwards vacuum component. It is used to create a vacuum seal between two NW25 (KF25) flanges. This centering ring features a polymer support ring combined with an FKM (fluoroelastomer/Viton) O-ring.
The NW25 Stainless Steel Clamping Ring (Part # C10514501) is a Edwards vacuum fitting. This is the standard stainless steel clamp used to connect two NW25 (KF25) vacuum flanges. It is labeled
The NW25 Aluminium Swing Clamp (Part # C10514403) is a Edwards vacuum fitting. This is a lightweight, hinged “swing clamp” used to connect two NW25 (KF25) vacuum flanges . It is made of durable aluminum and features a hinged design for quick, tool-free connection and disconnection of vacuum lines . It is easier to use than traditional stainless steel clamping rings .
The NW25 Polymer Swing Clamp (Part # C10514304) is a Edwards vacuum fitting. This is a lightweight, hinged “swing clamp” used to connect two NW25 (KF25) vacuum flanges . It is made of durable black polymer and features a hinged design for quick, tool-free connection and disconnection of vacuum lines .
The NW25 Aluminium Tee Fitting (Part # C10514411) is a Edwards vacuum component. It is a three-way fitting used to split or combine vacuum lines in an NW25 (KF25) system. It has three NW25 ports . This fitting is made of durable, lightweight aluminum for economical performance. It is ideal for low to medium vacuum applications down to 10⁻⁷ mbar . This listing is for one tee fitting
The NW25 to 3/4″ Hose Adaptor (Part # C10504266) is a Edwards vacuum fitting. It is used to connect an NW25 (KF25) vacuum flange to a 3/4 inch male NPT (National Pipe Thread) connection .
The NW25/10 Reducer (Part # C10514446) is a Edwards vacuum fitting. It is used to connect a larger NW25 (KF25) vacuum component to a smaller NW10 (KF10) component . This reducer is made of high-quality 316L stainless steel (SUS316L) for excellent durability and corrosion resistance .
The NW25 Centering Ring (Part # C10514396) is a Edwards vacuum component. It is the standard gasket used to create a reliable seal between two NW25 (KF25) vacuum flanges. This centering ring features a stainless steel (S/S) carrier equipped with a nitrile (NBR) rubber O-ring .
This is a Edwards replacement Co-Seal for NW32 and NW40 flanges. The part number is B27158501. It features an aluminum (ALI) carrier with an FKM (Viton) O-ring .
This is a Edwards replacement Co-Seal for NW32 and NW40 flanges. This Co-Seal is designed for use in high vacuum applications down to 10⁻⁸ Torr . It eliminates crevices and trapped gas volumes that can cause vacuum instability . If you are rebuilding your vacuum system, this is the correct OEM part.
The NW40 Copper Free Clamping Ring (Part # C10516501) is a Edwards vacuum component. It is the standard “C” clamp used to secure two NW40 (KF40) flanges, creating a vacuum-tight seal.
The NW40 Centering Ring (Part # C10516396) is a Edwards vacuum component. It is the standard gasket used to create a reliable seal between two NW40 (KF40) vacuum flanges. This centering ring features a stainless steel (S/S) carrier equipped with a nitrile (NBR) rubber O-ring .
The NW50 Stainless Steel Blank Flange (Part # C10517366) is a Edwards vacuum component. It is a solid metal cap used to permanently seal an unused NW50 (KF50) port on a vacuum chamber, pump, or manifold . This blank flange is made of high-quality 316L stainless steel (SUS316L) for excellent durability and corrosion resistance .
This is a Edwards replacement fan cowl for nXDS series dry scroll vacuum pumps. The fan cowl is the large plastic cover on the back of the pump that houses the cooling fan. If your cowl is cracked, damaged, or missing, this is the correct OEM replacement part
This kit is designed by Edwards to enable an experienced technician to perform maintenance and repair on nXDS pumps up to and including bearing replacement .
10 in stock
This is the silicone O-ring, measuring 660mm in total length. It is part number 48206600-660mm. This ring is used on Busch R5 pump models 0250C, 0250D, and 0302D . Made from soft, flexible silicone rubber, it creates a tight seal even in tricky spots.
10 in stock
This is a Edwards replacement O-ring. The part number is 085-031-425. It has an inner diameter of 1 3/4 inches and an outer diameter of 2 inches. The cross-section (thickness) of this O-ring is 1/8 inch (0.139 inches) . This is a standard AS568-219 size O-ring . It is used in various Edwards vacuum pumps for sealing static and dynamic applications . If you are rebuilding your pump, this is the correct OEM replacement part.
Out of stock
Not a member? Create an account
Already got an account? Sign in here
