$17.71
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Air Filter, DVP, Dry Vane, SB16, SB25, Part# 1801036
Air Filter, DVP, Dry Vane, SB16, SB25, Part# 1801036
This is an air intake filter (Part # 1801036). It fits on the inlet side of your pump. As air gets pulled into the pump, this filter catches any dust, dirt, or debris. Only clean air passes through to the inside of your pump .
This filter is made for DVP dry-running vane pumps. It fits these models :
SB 16
SB 25
DVP SB series pumps are dry-running vacuum pumps . They do not use oil for sealing. Instead, they use carbon vanes that slide inside the pump body. These pumps are common in factories for applications that cannot have any oil contamination .
Because there is no oil to trap dirt, a good air filter is even more important on dry pumps than on oil-lubricated ones.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP lubricated vane pump running clean with this air-oil separator / oil separator filter. Made specifically for DVP LB40, LB60, LC40, and LC60 pumps . This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. OEM quality direct replacement.
10 in stock
This Copper Gasket Ring (Part # 305005) is a crush-style seal used on drain plugs, filler ports, or fittings. Copper compresses to form a perfect leak-proof seal. Keep a few on hand for your next oil change.
These Perforated Screens act like strainers inside your pump. Choose the screen for your model: #4503005 for DVP LC.12 or #4502009 for DVP LB.40. Replace or clean them during routine maintenance to keep your pump running strong.
DVP LC.20 pump sealed tight. This Case Gasket (Part # 4901072) goes between the pump body and the end cover. Replace it every time you open the pump for service. It stops air leaks and keeps your vacuum strong.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB 40 and SC 40 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LB.40 vacuum pump sealed tight with this genuine ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
10 in stock
Keep your DVP LB.40 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
Keep your DVP LC.105 or LC.150 vacuum pump sealed tight with this copper ring gasket. Made from soft copper that compresses to form a perfect seal. Ideal for high-temperature areas where rubber gaskets would fail. OEM quality direct replacement.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.