$65.59
Get a pack of 10 Edwards shims for your vacuum pump repairs. Part number 30301727 (also listed as A30301727) is a 0.125 mm thickness shim . These thin metal spacers are used to adjust alignment, set precise clearances, and fill tiny gaps between mating parts. Having a pack of 10 means you have extras for multiple adjustments or future rebuilds .
Shim, 0. 125mm, Pack of 10, Edwards, Part# 30301727
Shim, 0. 125mm, Pack of 10, Edwards, Part# 30301727
A shim is a thin, flat piece of metal. It looks like a tiny flat washer. But it is not a seal. It is not a gasket.
A shim is a spacer. You put it under bearings or between other parts to change their position by a very small amount. As the product description explains, these shims are designed for achieving precise adjustments and spacing, aiding in maintaining the peak performance of your machinery .
This particular shim has a thickness of 0.125 mm. That is slightly thicker than a sheet of paper. It is designed for fine adjustments.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
10 in stock
10 in stock
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
The COUPLING COVER EH250/500 C/SEAL PK 1 is a complete replacement cover for the Edwards EH250 and EH500 mechanical booster pumps. It comes with the seal already included. This cover bolts onto the side of the pump where the motor connects. It protects the coupling area and holds the oil inside. If your existing cover is cracked, leaking oil, or damaged, this is the direct replacement you need. It fits both the EH250 and EH500 pump models .
10 in stock
10 in stock
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
10 in stock
The COUPLING FLANGE is a replacement adaptor flange made for Edwards vacuum pumps. It is specifically used to connect an EH250 or EH500 mechanical booster pump to a GV series dry pump . This flange bolts between the two pumps. It creates a secure, leak-free connection. If your pump system is leaking or the old flange is damaged, this is the direct replacement you need.
The COUPLING BOSS FAN ASSEMBLIES is a replacement part set made for Edwards EH Series Mechanical Booster Pumps. This assembly includes both the coupling boss and the cooling fan. The coupling boss connects the motor to the pump drive. The fan attaches to the boss and keeps the coupling area cool during operation. If your pump runs hot or the drive feels loose, this assembly may need replacement. Get both parts together in one convenient set.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.