$78.32
This Edwards Sleeve, LV Stage is a direct replacement part for Edwards DP40, QDP40, IQDP40, DP80, QDP80, and IQDP80 dry vacuum pumps . It is a cylindrical sleeve designed specifically for the LV (low vacuum) stage of these pump models . It provides a protective casing and a smooth surface for the movement of components during the pumping process . If your pump is making unusual noise or losing performance, replacing this sleeve can help restore proper operation .
Edwards Sleeve, LV Stage Part# 27820028
Edwards Sleeve, LV Stage Part# 27820028
This sleeve works on six different Edwards dry pump models :
DP40
QDP40
IQDP40
DP80
QDP80
IQDP80
If you own any of these pumps, this is the correct LV stage sleeve for you. These pumps are four-stage, positive displacement rotary pumps used in clean environments where oil contamination cannot be allowed .
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The Edwards Rotor, 3rd Stage Y (Part #26401143) is a replacement part for Edwards DP40, QDP40, and iQDP40 dry vacuum pumps .
Out of stock
Out of stock
The Edwards Rotor, 2nd Stage Y (Part #26401141) is a replacement part for Edwards DP40, QDP40, and iQDP40 dry vacuum pumps .
This Edwards Sleeve, 2nd Stage is a direct replacement part for Edwards DP40, QDP40, IQDP40, DP80, QDP80, and IQDP80 dry vacuum pumps . It is a cylindrical sleeve designed for the second stage of these pump models . It serves as a protective casing and provides a smooth surface for the movement of components during the pumping process .
Edwards QDP40 or QDP80 dry pump’s cooling system running efficiently with this Water Assembly Service Kit This comprehensive kit includes the essential components needed to service the water assembly: replacement O-rings, a filter, and a temperature control valve . It is designed for the QDP40, iQDP40, QDP80, and iQDP80 dry pump models .
Out of stock
This is an LV headplate. LV stands for Low Volume. Edwards designed different headplates for different stages of the pumping process. The LV headplate is used on the low vacuum side of the pump .
Out of stock
The Edwards Rotor, XLV (Part #26401144) is a replacement part for Edwards DP40, QDP40, and iQDP40 dry vacuum pumps .
This Viton O-ring measures exactly 49.5 mm inner diameter with 3 mm thickness. It replaces Part #02122079 (cross-reference OV-1409) . This O-ring serves as the intake seal for Edwards QDP-40 and iQDP-40 dry pumps, fitting in the intake O-ring groove below the ISO-40 fitting . It is also compatible with Edwards A Series A07V pumps and is included in O-Ring Kit 40130300D80OR . The Viton (FKM) material handles high heat up to 200°C and harsh chemicals better than standard rubber.
This Stator, 3rd Stage is a direct replacement part for Edwards DP40, QDP40, and IQDP40 dry vacuum pumps . It is the stationary component inside the third stage of your pump. If your pump is struggling to reach deep vacuum levels or making unusual sounds, replacing this stator can bring it back to full working condition .
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.