$1,164.80
This Stator, 3rd Stage is a direct replacement part for Edwards DP40, QDP40, and IQDP40 dry vacuum pumps . It is the stationary component inside the third stage of your pump. If your pump is struggling to reach deep vacuum levels or making unusual sounds, replacing this stator can bring it back to full working condition .
Stator, 3rd Stage - Edwards DP40, QDP40, and IQDP40 Part# 40001703
Stator, 3rd Stage - Edwards DP40, QDP40, and IQDP40 Part# 40001703
The Stator, 3rd Stage is a stationary part inside your pump. It sits in the third stage of the pumping process. The rotor spins inside the stator. This action creates the suction that pulls air and gases out of your system .
Think of your pump like a multi-stage rocket. Each stage adds more power. The third stage is where your pump reaches its final, deep vacuum level. If the third stage stator is worn, the whole pump loses its power.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This Viton O-ring measures exactly 24.99 mm inner diameter with 3.53 mm thickness. It replaces Part #2126024. This O-ring is specifically used on Edwards Dry pump family, including DP40, QDP40, IQDP40, DP80, QDP80, and IQDP80 models . The Viton (FKM) material handles high heat and harsh chemicals better than standard rubber .
The Edwards Rotor, 3rd Stage Y (Part #26401143) is a replacement part for Edwards DP40, QDP40, and iQDP40 dry vacuum pumps .
Out of stock
Out of stock
Keep your Edwards QDP40 or IQDP40 dry pump running reliably. This Check Valve Service Kit includes all the seals and components you need to complete regular maintenance of the exhaust check valves . Edwards recommends servicing the check valves every three months for best performance . This kit also fits the larger QDP80 and IQDP80 models .
Out of stock
The Edwards Rotor, YLV (Part #26401145) is a replacement part for Edwards QDP40 and iQDP40 dry vacuum pumps .
This is an LV headplate. LV stands for Low Volume. Edwards designed different headplates for different stages of the pumping process. The LV headplate is used on the low vacuum side of the pump .
The Edwards Rotor, XLV (Part #26401144) is a replacement part for Edwards DP40, QDP40, and iQDP40 dry vacuum pumps .
This Viton O-ring measures exactly 88.27 mm inner diameter with 5.33 mm thickness. It replaces Part #02126056 (cross-reference OV-2235) . This O-ring is specifically used on Edwards DP40, QDP40, iQDP40, DP80, QDP80, and iQDP80 dry pump models . The Viton (FKM) material handles high heat up to 205°C and harsh chemicals better than standard rubber .
This Viton O-ring measures exactly 49.5 mm inner diameter with 3 mm thickness. It replaces Part #02122079 (cross-reference OV-1409) . This O-ring serves as the intake seal for Edwards QDP-40 and iQDP-40 dry pumps, fitting in the intake O-ring groove below the ISO-40 fitting . It is also compatible with Edwards A Series A07V pumps and is included in O-Ring Kit 40130300D80OR . The Viton (FKM) material handles high heat up to 200°C and harsh chemicals better than standard rubber.
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.